[Aug 03, 2025] New 300-715 Exam Dumps with High Passing Rate

Get 300-715 Braindumps & 300-715 Real Exam Questions

Cisco Identity Services Engine is a powerful tool that provides centralized policy management and enforcement for network access control. It allows organizations to manage and secure their network infrastructure by enforcing policies that are based on user identity, device type, and location. The ISE provides a unified policy framework that simplifies access control and ensures consistent security across the network.

Cisco 300-715 Certification Exam is a comprehensive test that covers a wide range of topics related to ISE deployment, configuration, and management. Candidates are expected to have a solid understanding of network security principles, access control policies, and authentication and authorization protocols. They must also be able to troubleshoot common ISE-related issues and have a good understanding of network infrastructure components such as switches, routers, and firewalls. Passing the Cisco 300-715 exam is an important milestone for IT professionals looking to advance their careers in network security and access control.

More about 300-715 Evaluation

The Cisco 300-715 test is categorized among other concentration tests where you only have to pass one. You select and take it after clearing the core exam called 350-701. With exam 300-715, each candidate has 1.5 hours to comprehensively answer all the questions presented to him or her. Listed below are the exam domains:

• Profiler;
• Device administration for network access.
• Policy enforcement;

Please note, other topics might be covered in the final exam but the above-listed are the commonly tested areas. If you intend to sit for 300-715 exam, enroll in the ‘Implementing and Configuring Cisco ISE’ course to help you prepare. Study guides also make great sources of information about the real test.

 

NEW QUESTION # 59
An organization wants to standardize the 802 1X configuration on their switches and remove static ACLs on the switch ports while allowing Cisco ISE to communicate to the switch what access to provide What must be configured to accomplish this task?

• A. extended access-list on the switch for the client
• B. dynamic access list within the authorization profile
• C. port security on the switch based on the client's information
• D. security group tag within the authorization policy

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_sga_pol.html#

NEW QUESTION # 60
Which two actions occur when a Cisco ISE server device administrator logs in to a device?
(Choose two)

• A. The Cisco ISE server queries the external identity store.
• B. The device queries the internal identity store
• C. The device queries the Cisco ISE authorization server
• D. The device queries the external identity store
• E. The Cisco ISE server queries the internal identity store

Answer: A,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_device_admin.html#concept_9B1DD5A
7AD9C445AAC764722E6E7D32A
The device administrator performs the task of setting up a device to communicate with the Cisco ISE server. When a device administrator logs on to a device, the device queries the Cisco ISE server, which in turn queries an internal or external identity store, to validate the details of the device administrator. When the validation is done by the Cisco ISE server, the device informs the Cisco ISE server of the final outcome of each session or command authorization operation for accounting and auditing purposes.

NEW QUESTION # 61
An organization is hosting a conference and must make guest accounts for several of the speakers attending. The conference ended two days early but the guest accounts are still being used to access the network. What must be configured to correct this?

• A. Create an authorization rule denying guest access.
• B. Navigate to the Guest Portal and delete the guest accounts.
• C. Navigate to the Sponsor Portal and suspend the guest accounts.
• D. Create an authorization rule denying sponsored guest access.

Answer: C

NEW QUESTION # 62
Select and Place

Answer:

Explanation:

NEW QUESTION # 63
In a standalone Cisco ISE deployment, which two personas are configured on a node? (Choose two )

• A. subscriber
• B. primary
• C. policy service
• D. publisher
• E. administration

Answer: C,E

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_010.html

NEW QUESTION # 64
Which Cisco ISE node does not support automatic failover?

• A. Policy Services node
• B. Monitoring node
• C. Admin node
• D. Inline Posture node

Answer: A

NEW QUESTION # 65
An engineer must configure an HTTP probe on a Cisco ISE virtual appliance running on VMWare using a dedicated interface for profiling. The interface is assigned to the VM Network port group.
The engineer is logged into the hypervisor with a user account that only provides access to the Cisco ISE VM and the network settings for the VM. Which security setting must be changed for this interface to accept SPAN traffic?

• A. Set Promiscuous mode to inherit from vSwitch in the Port Group properties.
• B. Set Promiscuous mode to Accept in the Port Group properties.
• C. Set Promiscuous mode to Accept in the vSwitch properties.
• D. Set Promiscuous mode to inherit from Port Group in the vSwitch properties.

Answer: B

NEW QUESTION # 66
An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected.
Which service should be used to accomplish this task?

• A. guest access
• B. posture
• C. client provisioning
• D. profiling

Answer: D

Explanation:
Section: Profiler
Explanation

NEW QUESTION # 67
An engineer is configuring 802.1X and is testing out their policy sets. After authentication, some endpoints are given an access-reject message but are still allowed onto the network. What is causing this issue to occur?

• A. The authorization results for the endpoints include the Trusted security group tag.
• B. The authorization results for the endpoints include a dACL allowing access.
• C. The switch port is configured with authentication open.
• D. The switch port is configured with authentication event server dead action authorize vlan.

Answer: C

NEW QUESTION # 68
In which scenario does Cisco ISE allocate an Advanced license?

• A. guest services with dACL enforcement
• B. dynamic device profiling
• C. high availability Administrator nodes
• D. endpoint authorization using SGA enforcement

Answer: D

NEW QUESTION # 69
Refer to the exhibit.
An engineer is configuring Cisco ISE for guest services They would like to have any unregistered guests redirected to the guest portal for authentication then have a CoA provide them with full access to the network that is segmented via firewalls Why is the given configuration failing to accomplish this goal?

• A. The Guest Flow condition is not in the line that gives access to the quest portal
• B. The Network_Access_Authentication_Passed condition will not work with guest services for portal access.
• C. The Guest Portal and Guest Access policy lines are in the wrong order
• D. The Permit Access result is not set to restricted access in its policy line

Answer: C

NEW QUESTION # 70
By default, which traffic does an 802.IX-enabled switch allow before authentication?

• A. all traffic
• B. no traffic
• C. traffic permitted in the default ACL on the switch
• D. traffic permitted in the port dACL on Cisco ISE

Answer: C

NEW QUESTION # 71
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

Answer:

Explanation:

NEW QUESTION # 72
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two)

• A. access-request
• B. access-accept
• C. access-challenge
• D. access-reserved
• E. access-response

Answer: B,C

NEW QUESTION # 73
An administrator connects an HP printer to a dot1x enable port, but the printer in not accessible.
Which feature must the administrator enable to access the printer?

• A. MAC authentication bypass
• B. RADIUS authentication
• C. change of authorization
• D. TACACS authentication

Answer: A

Explanation:
https://community.cisco.com/t5/network-access-control/ise-for-printer-security/m-p/3933216

NEW QUESTION # 74
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two)

• A. BYOD
• B. guest AUP
• C. new AD user 802 1X authentication
• D. hotspot

Answer: A,C

NEW QUESTION # 75
An administrator is troubleshooting an endpoint that is supposed to bypass 802.1X and use MAB.
The endpoint is bypassing 802.1X and successfully getting network access using MAB. However the endpoint cannot communicate because it cannot obtain an IP address. What is the problem?

• A. The endpoint is using the wrong protocol to authenticate with Cisco ISE.
• B. The 802.1X timeout period is too long.
• C. An AC I on the port is blocking HTTP traffic
• D. The DHCP probe for Cisco ISE is not working as expected.

Answer: B

Explanation:
Based on numerous deployment experiences, the recommendation is to set the tx-period value to
10 seconds to provide the most optimal time for MAB devices. Setting the value below 10 seconds may result in unwanted behavior, and setting the value greater than 10 seconds may result in DHCP timeouts.

NEW QUESTION # 76
An engineer wants to ease the management of endpoint identity groups from the Cisco ISE GUI.
From the Identity Management menu in Cisco ISE, the engineer must be able to list the endpoint identity groups with a name that contains Android. Which task must the engineer perform?

• A. Create and save a quick filter with name equals Android as the criteria.
• B. Create and save an advanced filter with name equals Android as the criteria.
• C. Create an identity group named Android and populate the group with Android devices only.
• D. Create an identity group named Android and set the parent group to profiled.

Answer: B

NEW QUESTION # 77
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out Which configuration is causing this behavior?

• A. One of the nodes is an active PSN.
• B. All of the nodes participate in the PAN auto failover.
• C. One of the nodes is the Primary PAN
• D. All of the nodes are actively being synched.

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_deployment.html#ID185

NEW QUESTION # 78
Which command displays all 802 1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?

• A. show authentication sessions interface Gi 1/0/x
• B. Show authentication sessions
• C. show authentication sessions interface Gi1/0/x output
• D. show authentication sessions output

Answer: C

NEW QUESTION # 79
Which are two characteristics of TACACS+? (Choose two ) ,

• A. It combines authorization and authentication functions.
• B. It uses UDP port 49.
• C. It uses TCP port 49.
• D. It encrypts the password only.
• E. It separates authorization and authentication functions.

Answer: A,D

NEW QUESTION # 80
Which platform does a Windows-based device download the Network Assistant from?

• A. Cisco download site
• B. Cisco ISE
• C. Microsoft app store
• D. native OS

Answer: B

NEW QUESTION # 81
A network administrator changed a Cisco ISE deployment from pilot to production and noticed that the JVM memory utilization increased significantly. The administrator suspects this is due to replication between the nodes What must be configured to minimize performance degradation?

• A. Ensure that Cisco ISE is updated with the latest profiler feed update
• B. Change the reauthenticate interval.
• C. Review the profiling policies for any misconfiguration
• D. Enable the endpoint attribute filter

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide_23_chapter_010111.html

NEW QUESTION # 82
A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice. Which command should the engineer run on the interface to accomplish this goal?

• A. authentication host-mode multi-auth
• B. authentication host-mode single-host
• C. authentication host-mode multi-domain
• D. authentication host-mode multi-host

Answer: A

NEW QUESTION # 83
......

300-715 Dumps To Pass Cisco Exam in 24 Hours - DumpTorrent: https://www.dumptorrent.com/300-715-braindumps-torrent.html

Cisco 300-715 Actual Questions and Braindumps: https://drive.google.com/open?id=1Ou4wbM3OcdXf6laSnh0InLzczX9fSRbS