[Dec 12, 2024] Get Free Updates Up to 365 days On Developing 350-601 Braindumps

Best Quality Cisco 350-601 Exam Questions

NEW QUESTION # 133
An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics. Which configuration set accomplishes this task?

• A. Option C
• B. Option B
• C. Option A
• D. Option D

Answer: B

NEW QUESTION # 134
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once

Answer:

Explanation:

Explanation
Diagram Description automatically generated

NFS:
-Used to boot VMDK files
-Uses lease-based model for file locking
-Used to provide shared storage for hypervisors
SMB/CIFS:
-Used to boot VHDX files
-Used to provide shared storage for hypervisors

NEW QUESTION # 135
The Cisco TACACS+ on a Cisco Nexus Series Switch must authenticate any user attempting to access the device and fail over to the local account if the TACACS+ sever becomes unavailable.
Which command accomplishes these goals?

• A. aaa authentication login console group local
• B. aaa authentication login default group ISE local
• C. aaa authentication login default local
• D. aaa authentication login default fallback error local

Answer: B

Explanation:
The command aaa authentication login default group ISE local configures the Cisco Nexus Series Switch to use TACACS+ for authentication by default and specifies a fallback to local authentication if the TACACS+ server becomes unavailable. This ensures that users are authenticated against the TACACS+ server when it is available, but allows them to use local switch credentials if the server cannot be reached, meeting the requirement for failover to local account1.
References :=
* Cisco documentation on configuring TACACS+ for Cisco Nexus Series Switches provides detailed steps and explanations for setting up authentication and ensuring failover to local accounts

NEW QUESTION # 136
An engineer is implementing the Cisco ACI fabric and wants to reduce the amount of TCAM resources consumed by the fabric The engineer also needs to ensure that all EPGs m a VRF consume the same services Which action should be taken to meet these requirements?

• A. Configure preferred groups in the VRF for al EPGs
• B. Configure a single contract provided and consumed in all EPGs
• C. Implement vzAny feature
• D. Implement an unenforced VRF

Answer: B

Explanation:
In Cisco ACI, TCAM resources can be optimized by configuring a single contract that is provided and consumed by all EPGs within a VRF. This approach ensures that all EPGs consume the same services, thus reducing the number of individual contracts and associated TCAM entries. By having a common contract, the ACI fabric can efficiently manage access control policies and service insertion without the need for multiple, redundant entries in the TCAM, which can lead to resource exhaustion. References: The information is based on the best practices for TCAM management in Cisco ACI fabrics, as detailed in the Cisco community discussions and Cisco's official documentation on TCAM resource issues and workarounds12. Additionally, the concept of using a single contract for multiple EPGs is supported by the Cisco ACI Endpoint Security Group (ESG) Design Guide, which outlines the steps for implementing a single ESG for open communication between subnets (EPG selectors)

NEW QUESTION # 137
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.

Answer:

Explanation:

Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server

NEW QUESTION # 138
Refer to the exhibit.

Which VLANs are capable to be assigned on vPC interfaces?

• A. 100-104
• B. 100-102
• C. 100-105
• D. 100-103

Answer: A

Explanation:
The VLANs capable of being assigned on vPC interfaces are those that are active on the vPC peer-link.
According to the exhibit, the active VLANs on the vPC peer-link range from 100 to 105. However, VLAN 105 is not listed under the individual port statuses for Po7 and Po8, which indicates that VLAN 105 is not actively participating in the vPC. Therefore, the VLANs that can be assigned to vPC interfaces are 100-104.
References := For a detailed understanding of vPC configurations and VLAN assignments, one should refer to the Cisco Data Center Core Technologies study materials, which provide comprehensive coverage of vPC operations and best practices.

NEW QUESTION # 139
An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link Which load balancing method should be used to accomplish this goal?

• A. src-id/dst-id/oxid
• B. src-dst-oui
• C. src-id/dst-id
• D. src-dst-port

Answer: A

Explanation:
Exchange based-The first frame in an exchange picks a link and subsequent frames in the exchange follow the same link. However, subsequent exchanges can use a different link. This provides more granular load balancing while preserving the order of frames for each exchange. Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_interfaces/pc.html Load balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange OX ID (src-dst-ox-id, the default) for load balancing path selection. Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nx-os/nx_os_fabric/vsan.html?bookSearch=true
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_3/san-os/configuration/guide/PortChnl.pdf

NEW QUESTION # 140
Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

• A. PSU
• B. CIMC
• C. third-party
• D. system
• E. BIOS

Answer: B,E

Explanation:
Options D and E are the correct firmware packages that are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle. The bundle contains the firmware for the CIMC (Cisco Integrated Management Controller) and the BIOS (Basic Input/Output System) of the server. The other options are either not part of the bundle or not applicable for the server. References:
* Cisco UCS C-Series Rack-Mount Server Software and Firmware Compatibility Matrix for Cisco UCS Manager, Release 4.0 [Cisco UCS Manager], Cisco UCS C-Series Rack-Mount Server Software and Firmware Compatibility Matrix for Cisco UCS Manager, Release 4.0, Cisco UCS C-Series Rack-Mount UCS-Managed Server Software Bundle
* Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 4.0
[Cisco Integrated Management Controller], Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 4.0, Firmware Management

NEW QUESTION # 141
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)

• A. SPAN source ports can be monitored in multiple SPAN sessions.
• B. The rx/tx option is available for VLAN or VSAN SPAN sessions.
• C. A SPAN source port cannot be a destination SPAN port.
• D. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
• E. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.

Answer: C,D

Explanation:
Section: Network
Explanation/Reference:

NEW QUESTION # 142
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?

• A. Data center
• B. IP address
• C. VM name
• D. VMM domain

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_0_1/b_ACI_Virtualization_Guide_3_0_1_chapter_0100.html

NEW QUESTION # 143
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

• A. The monitoring of Fibre Channel traffic is limited to the default VSAN.
• B. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
• C. The destination port for monitoring must be an unassigned Fibre Channel port.
• D. Fibre Channel traffic is monitored only on one vHBA per server.

Answer: B

Explanation:
Explanation
You can monitor Fibre Channel traffic using either a Fibre Channel traffic analyzer or an Ethernet traffic analyzer. When Fibre Channel traffic is monitored with an Ethernet traffic monitoring session, at an Ethernet destination port, the destination traffic is FCoE. The Cisco UCS 6300 Fabric Interconnect supports FC SPAN only on the ingress side. A Fibre Channel port on a Cisco UCS 6248 Fabric Interconnect cannot be configured as a source port.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System- Monitoring/3-2/b_UCSM_GUI_System_Monitoring_Guide_3_2/ b_UCSM_GUI_System_Monitoring_Guide_3_2_chapter_01101.pdf

NEW QUESTION # 144
Refer to the exhibit.

Refer to the exhibit. A developer must create a Bash script that performs a Chef Client reload in the event of a system reset Which command completes the script?

• A. Option C
• B. Option A
• C. Option B
• D. Option D

Answer: D

NEW QUESTION # 145
Drag and Drop Question
Refer to the exhibit. In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
- R1 must be the active RP.
- R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Answer:

Explanation:

Explanation:
* It's important the RP address is NOT the loopback address but one of the other address in the subnet defined on the loopback
* By default, OSPF advertises all loopbacks as /32 so the need of 'ip ospf network point-to-point' command to advertise the subnet mask
* We hardcode the OSPF RID to avoid any duplicate RID problem in case address of Loopback1 is the highest loopback
* There is a need to define a mapping agent for auto-rp to work (not shown here)
* BSR doesn't support yet the possibility to advertise as candidate RP an IP address which is not defined on any interface. This implies that BSR cannot be used with phantom RP. We need to use either Auto-RP or static RP.

NEW QUESTION # 146
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)

• A. The rx/tx option is available for VLAN or VSAN SPAN sessions.
• B. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.
• C. SPAN source port can be monitored in multiple SPAN sessions.
• D. A SPAN source port cannot be a destination SPAN port.
• E. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

Answer: D,E

Explanation:
https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/Cisco_Ne

NEW QUESTION # 147
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?

• A. service profiles
• B. systems
• C. roles
• D. servers

Answer: A

Explanation:
Section: Compute
Explanation/Reference:

NEW QUESTION # 148
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)

• A. The rx/tx option is available for VLAN or VSAN SPAN sessions.
• B. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.
• C. SPAN source port can be monitored in multiple SPAN sessions.
• D. A SPAN source port cannot be a destination SPAN port.
• E. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

Answer: D,E

Explanation:
https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/Cisco_Nexus_5000_Series_Switch_CLI_Software_Configuration_Guide_chapter50.html

NEW QUESTION # 149
A company is investigating different options for IT automation tools. The IT team has experience with python programming language and scripting using a declarative language. The proposed tool should be easy to set up and should not require installing an agent on target devices. The team will also need to build custom modules based on the python programming language to extend the tools functionality. Which automation tool should be used to meet these requirements?

• A. NX-API
• B. Puppet
• C. Chef
• D. Ansible

Answer: D

NEW QUESTION # 150
Refer to Exhibit:

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?

• A. Option C
• B. Option B
• C. Option A
• D. Option D

Answer: B

NEW QUESTION # 151
After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced. Which two actions must be taken to meet this requirement before the isolated device is reloaded'? (Choose two)

• A. Change the vPC system-priority of the replacement chassis to a lower value than the peer.
• B. Change the vPC system-priority of the replacement chassis to a higher value than the peer if.
• C. Set the vPC MAC address to a higher value than the peer
• D. Configure auto-recovery to the disable state on both peers
• E. Set the vPC MAC address to a tower value than the peer

Answer: B,D

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
-------
https://community.cisco.com/t5/networking-documents/vpc-auto-recovery-feature-in-nexus-7000/ta-p/3123651

NEW QUESTION # 152
Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:
- Two-factor authentication must be enabled for all UCS user
authentication.
- All AAA packets must be encrypted and use TCP port 49 to establish
communication.
Which set of actions needs these requirements?

• A. Create the LDAP provider.
  Change the LDAP group rule in an LDAP provider.
• B. Remove the LDAP provider.
  Create a TACACS+ provider in user management.
• C. Create the RADIUS group mapping.
  Change the RADIUS group rule in a RADIUS provider.
• D. Delete the LDAP group mapping.
  Create a RADIUS provider in user management.

Answer: B

NEW QUESTION # 153
Refer to the exhibit.


Refer to the exhibit. A storage engineer must monitor the traffic from the file server to the FC analyzer. The file server and the database use the same storage array. Which configuration must be applied to the Cisco MDS 9000 Series Switch to accomplish this goal?

• A. Option C
• B. Option B
• C. Option A
• D. Option D

Answer: B

NEW QUESTION # 154
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

• A. EPLD updates are installed only via the Cisco DCNM GUI
• B. EPLD packages update hardware functionality on a device
• C. EPLD updates are nondisruptive to traffic flow
• D. EPLD bundles are released separately from a Cisco MDS NX-OS release

Answer: B

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/
mds9000/sw/6_2/release/notes/epld/epld_rn.html

NEW QUESTION # 155
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two)

• A. frames that were sent on the link but not yet received.
• B. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender.
• C. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender
• D. frames that were sent on the link and received.
• E. frames that were sent with high credit

Answer: A,C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fcoe/config/ cisco_nexus7000_fcoe_config_guide_8x/configuring_fcoe.html

NEW QUESTION # 156
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

• A. switch<config-vsan-db)# vsan 100 bind interface vfc 31
• B. switch(config-vsan-cb># vsan 100 bind interface fc 3/1
• C. switch(config-vsan-db)# vsan 100 interface vfc 31
• D. switch(config-vsan-db># vsan 100 fc 3/1

Answer: C

Explanation:
switch(config-vsan-db)# vsan vsan-id interface fc slot/port
or
switch(config-vsan-db)# vsan vsan-id interface vfc slot/port

NEW QUESTION # 157
......

Cisco Exam Practice Test To Gain Brilliante Result: https://www.dumptorrent.com/350-601-braindumps-torrent.html

Tested Material Used To 350-601: https://drive.google.com/open?id=1dqJL7cMg7chducMAhOuyn2g1NhRW4zrf