[Dec-2021] C_IBP_2105 Certification with Actual Questions from DumpTorrent
Updated C_IBP_2105 Dumps PDF - C_IBP_2105 Real Valid Brain Dumps With 82 Questions!
NEW QUESTION 21
What function would you use to configure a year-to-date calculation?
- A. Last Period Aggregation
- B. Rolling Aggregation
- C. Cumulative Aggregation
- D. Dynamic Rolling Aggregation
Answer: C
NEW QUESTION 22
Which supply chain challenge is addressed by SAP IBP for demand?
- A. Inability to arrive at consensus demand
- B. Inability to respond to short-term changes in supply and demand
- C. Inability to understand and shape actual demand
- D. Inability to synchronize supply and demand
Answer: C
NEW QUESTION 23
You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?
- A. SAP IBP for Sales and Operations Planning
- B. SAP IBP for Demand
- C. SAP IBP for Demand Driven Replenishment
- D. SAP IBP for Inventory
Answer: C
NEW QUESTION 24
Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.
- A. To filter data in an Application Job template
- B. To filter using attributes that have a large number of values
- C. To filter attributes based on other attribute filters
- D. To filter attributes based on specific values
Answer: B,C
NEW QUESTION 25
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Demand sensing of demand data using the supply chain algorithm library
- B. Demand sensing of demand data using predictive analytics tools
- C. Detailed statistical analysis of demand data using predictive analytics tools
- D. Embedded, on-the-fly demand analytics
- E. Detailed statistical analysis of demand data using the supply chain algorithm library
Answer: A,C,D
NEW QUESTION 26
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. The planning area with this time profile must be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. A time profile has to be activated so that the application job can proceed.
- D. This application job cannot be scheduled for immediate start.
Answer: A
NEW QUESTION 27
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- C. Activate Local Member Recognition is selected.
- D. A key figure is created in the Planning Area app.
Answer: C
NEW QUESTION 28
How can you check if key figure is editable or non-editable?
- A. Using the Web-based Planning app when selecting key figures
- B. Using the Key Figure Calculations app
- C. Using the Analytics Advanced app when selecting key figures
- D. Using the Edit View and then the Edit Planning View option
Answer: A
NEW QUESTION 29
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Reorder point
- C. Lot sizes
- D. Target inventory level
Answer: A,C
NEW QUESTION 30
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for manually editable key figures.
- B. Fixing is possible for system editable key figures.
- C. Fixing is possible for a certain quantity of a key figure value.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: A,D
NEW QUESTION 31
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Organize charts.
- B. Link two analytics charts.
- C. Add process templates.
- D. Rename the charts.
- E. Display all assigned analytics on a single UI.
Answer: A,C,E
NEW QUESTION 32
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Units of measure are usually not time-independent.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Analytics provide the user with the option to select the target unit of measure.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,C,D
NEW QUESTION 33
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct Answers to this question.
- A. Attributes
- B. Key figure type
- C. Modified date
- D. Reason code
- E. Scenario ID
Answer: A,C,D
NEW QUESTION 34
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- B. It checks whether the sourcing in the Production Source Item Master Data type exists.
- C. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- D. It checks whether the required planning level master data exists for a subset of input key figures.
- E. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
Answer: A,C,D
NEW QUESTION 35
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?
- A. IF("PERIODID3" ="$$PERIODID3CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID5" ="$$PERIODID5CU$$...)
Answer: B
NEW QUESTION 36
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Enabling fixing for the key figure
- B. Setting permitted planning levels
- C. Enabling planning notes for the key figure
- D. Hiding or displaying totals for the key figure
- E. Setting disaggregation logic for the key figure
Answer: A,C,E
NEW QUESTION 37
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using local member
- B. Using key figure calculation
- C. Using attribute as a key figure
- D. Using aggregation mode average
Answer: D
NEW QUESTION 38
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is calculated and editable.
- B. The key figure is set to Not Editable.
- C. The key figure is stored and editable.
- D. The key figure is calculated and aggregation mode is selected.
Answer: C
NEW QUESTION 39
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
- B. Maintain the CAPASUPPLY key figure values in the planning area.
- C. Set the Capacity Supply additional attribute in the time profile.
- D. Set the Capacity Supply Time Series indicator attribute as a key.
Answer: A
NEW QUESTION 40
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer Source
- B. Time Series Property Attribute in Customer Product
- C. Time Series Property Attribute in Product
- D. Time Series Property Attribute in Customer
Answer: C
NEW QUESTION 41
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific demand sensing job.
- B. Change scenario-specific master data.
- C. Display data in analytics.
- D. Run a scenario-specific inventory optimization job.
- E. Share data with other users.
Answer: C,D,E
NEW QUESTION 42
Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object?
- A. This object is not exposed to the user in planning views or modeling.
- B. This object provides a single value for a unique planning combination.
- C. This object contains user-defined criteria that monitor execution of business plans.
- D. This type of key figure is not usually stored and it cannot be set to editable.
Answer: B
NEW QUESTION 43
......
SAP C_IBP_2105 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Planning Operators & Application Jobs > 12% | Use Planning Operators. |
| General Configuration of a Planning Area > 12% | Display, create, copy, edit, check, and activate a planning area. |
| Inventory < 8% | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. |
| S&OP Review < 8% | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. |
| Key Figures & Attributes > 12% | Create and use key figures and attributes. |
| User Interface > 12% | Use the Fiori Launchpad to customize the UI, work with Excel UI |
| Demand Planning 8% - 12% | Create statistical forecast using historical data with basic methods. |
| Solution Architecture < 8% | Describe the benefits of implementing SAP's Integrated Business Planning solution. |
| Analytics and Reporting < 8% | Define and view information with user-defined charts and dashboards. |
| Supply and Response > 12% | Configure supply planning, run various solvers to generate planning results |
Pass Your C_IBP_2105 Exam Easily With 100% Exam Passing Guarantee: https://www.dumptorrent.com/C_IBP_2105-braindumps-torrent.html