[Dec-2021] Dumps Practice Exam Questions Study Guide for the 5V0-41.20 Exam

5V0-41.20 Dumps with Practice Exam Questions Answers

NEW QUESTION 14
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?

• A. The device is faulty and will need a replacement.
• B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
• C. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
• D. This is an expected behavior.

Answer: D

 

NEW QUESTION 15
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?

• A. The Edge's profile does not include Backhaul hubs as an option.
• B. The hub is not configured with the proper IP address.
• C. The Dynamic Branch to Branch has not been enabled.
• D. Dynamic Branch to Branch using gateways has not been enabled.

Answer: D

 

NEW QUESTION 16
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?

• A. uI has been configured forcing traffic into the underlay towards the hub.
• B. Internet Backha.
• C. The underlay path is not available forcing traffic into the overlay.
• D. Configuring Business Policy Direct settings have no affect on traffic flows.
• E. The other Edge location is advertising a secure route for the application's subnet.

Answer: A

 

NEW QUESTION 17
Scenario 2:
After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The tunnel from the Dallas site to the Seattle hub is not coming up.
What are two things that should be checked to determine the issue? (Choose two.)

• A. Dynamic Branch to Branch is not enabled.
• B. Spoke Edge and Hub Edge have a mismatched certificate.
• C. Hub WAN Interface might be behind a firewall.
• D. Spoke Edge and Hub Edge are two different Edge models.

Answer: B,D

 

NEW QUESTION 18
Scenario:1
A network administrator is tasked with enabling SD-WAN at three branch locations, A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center in this environment as well. Please refer to the topology.
Exhibit.

One of the Edges at the Chicago site is unable to activate. The Edge has a red LED. What is the next troubleshooting step?

• A. If the Edge is connected to the MPLS circuit which does not have DHCP, determine if there is a static IP configuration that needs to be applied upon activation.
• B. If the Edge is connected to the MPLS circuit, determine if the Hub is advertising gateway routes.
• C. If the Edge is connected to its HA peer, determine if there is a link-light on the HA peer-link.
• D. If the Edge is connected to its HA peer, determine if underlay BGP peering is present between the two Edges.

Answer: B

 

NEW QUESTION 19
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).


What is the cause of this issue?

• A. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
• B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
• C. The activation link did not specify the updated image location requiring the Edge to be re-activated.
• D. The Edge will be offline for about 4 hours until it has completed the factory image installation.

Answer: C

 

NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.

A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)

• A. Modify the AS Path in New York to be longer for 10.20.11.0/24.
• B. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
• C. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
• D. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.

Answer: B,D

 

NEW QUESTION 21
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)

• A. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
• B. Determine if the NVS has been enabled and assigned to a profile.
• C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
• D. Determine if the DH parameter on the Edge has been configured.

Answer: A,C

 

NEW QUESTION 22
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?

• A. Verify the Business Policy flows are matching.
• B. Verify if Path-MTU Discovery is disabled.
• C. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
• D. Verify if there is latency, loss, or jitter on the underlay.

Answer: B

 

NEW QUESTION 23
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.

When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?

• A. Cloud VPN is not enabled in the AMER Branch profile.
• B. The next hop does not respond to ICMP pings.
• C. The Edge's profile does not specify the correct Edge Model.
• D. The subnet mask assigned to the Edge is incorrect.

Answer: C

 

NEW QUESTION 24
Scenario 1:
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.

An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.
What should the local technician check first when troubleshooting the issue?

• A. Verify the link light sequence of the HA ports.
• B. Verify beep sequence of the Edge devices.
• C. Review the Orchestrator for HA misconfiguration issues.
• D. Review color of the LED.

Answer: A

 

NEW QUESTION 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Where can the network administrator check to see what routes are present on the London-site Edge?

• A. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"
• B. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"
• C. Log into the VCO > Monitoring > Overlay Flow Control
• D. Log into the VCO > Configuration > Overlay Flow Control

Answer: A

 

NEW QUESTION 26
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?

• A. Segmentation is currently not supported on VeloCloud Edge.
• B. Have Guest wireless and Production traffic in the same segment but different VLANs.
• C. Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.
• D. Create two subnets, one for Guest wireless traffic and another one for Production traffic.

Answer: A

 

NEW QUESTION 27
Scenario 3:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.
Where should the administrator check first to verify if the configuration is correct?

• A. Verify that redistribution between the primary hub site and San Jose is enabled.
• B. Verify that the NVS feature is enabled in Cloud VPN.
• C. Verify the static routes to San Jose from all Branches are configured.
• D. Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.

Answer: C

 

NEW QUESTION 28
......

Free VMware SD-WAN Troubleshoot 2021 5V0-41.20 Exam Question: https://www.dumptorrent.com/5V0-41.20-braindumps-torrent.html

5V0-41.20 by VMware SD-WAN Troubleshoot 2021 Actual Free Exam Practice Test: https://drive.google.com/open?id=1796r1uUrZgKNDVwlQ6HJHzxekW4TdcHl