Get 2023 Free SAP C_IBP_2208 Exam Practice Materials Collection

Get Latest and 100% Accurate C_IBP_2208 Exam Questions

NEW QUESTION # 44
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.

• A. Assign the compound master data type and its component master data types.
• B. Configure at least one calculated key figure for the planning area.
• C. Specify a planning horizon in the planning area for each level of the assigned time profile.
• D. Configure at most two input key figures on the same planning level in a key figure calculation.

Answer: A,C

NEW QUESTION # 45
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.

• A. A forecast metric key figure, such FCSTMAPE
• B. A currency conversion key figure, such as exchange rate
• C. A unit of measure key figure, such as UOMCONVERSIONFACTOR
• D. A special key figure marked as an aggregate key figure (aggregate constraint)

Answer: C,D

NEW QUESTION # 46
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.

• A. Number of local members and complexity of calculations
• B. Complex calculation graphs for key figures
• C. Excessive SAP IBP formatting in the Microsoft Excel UI
• D. Number of analytics charts displaying key figures' values

Answer: B,C

NEW QUESTION # 47
You define fixing for a key figure.Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.

• A. Fixing is possible for a certain period, including all child values in the hierarchy.
• B. Fixing is possible for manually editable key figures.
• C. Fixing is possible for system editable key figures.
• D. Fixing is possible for a certain quantity of a key figure value.

Answer: A,C

NEW QUESTION # 48
Which features apply to quota violations modeled with the optimizer?

• A. Min and Max Quotas have to be the same as sourcing ratios.
• B. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
• C. Quotas can be modeled for sourcing location, production, and consensus demand.
• D. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.

Answer: D

NEW QUESTION # 49
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.

• A. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
• B. Key figures can be calculated across different planning levels.
• C. The calculation chain for a key figure must always result in a calculated key figure.
• D. All key figure calculations have calculation inputs, which can be marked as stored or calculated.

Answer: B,D

NEW QUESTION # 50
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

• A. IF("PERIODID4" ="$$PERIODID4CU$$...)
• B. IF("PERIODID3" ="$$PERIODID3CU$$...)
• C. IF("PERIODID5" ="$$PERIODID5CU$$...)
• D. IF("PERIODID2" ="$$PERIODID2CU$$...)

Answer: A

NEW QUESTION # 51
Why would you set up a cascading filter in the planning view?Note: There are 2 correct answers to this question.

• A. To filter using attributes that have a large number of values
• B. To filter data in an Application Job template
• C. To filter attributes based on other attribute filters
• D. To filter attributes based on specific values

Answer: A,D

NEW QUESTION # 52
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note: There are 2 correct answers to this question.

• A. Charts creation in SAP Supply Chain Control Tower
• B. Demand Sensing with Gradient Boosting (Full)
• C. Supply Heuristics in SAP IBP for sales and operations
• D. Decoupling Points determination in SAP IBP for demand-driven replenishment

Answer: B,C

NEW QUESTION # 53
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?

• A. Configuration items should be bundled in the collections based on the SAP IBP project stream.
• B. You should delete collections after they have been transported.
• C. A planning area with the copy operators assigned must be bundled in one collection.
• D. A planning area with its time profile must be bundled in one collection.

Answer: C,D

NEW QUESTION # 54
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.

• A. Splitting the values from detailed to aggregated level by using a copy operator
• B. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
• C. Splitting the values from aggregated to detailed level, based on the time profile attribute
• D. Splitting the values from aggregated to detailed level using multiplication by the proportions

Answer: B,D

NEW QUESTION # 55
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?

• A. A time profile has to be activated so that the application job can proceed.
• B. The assigned Planning Area must be active.
• C. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
• D. This application job can be run for multiple time profiles at once.

Answer: C

NEW QUESTION # 56
Model configuration allows the attributes of a master data type to be assigned as key figures.Which features are relevant for this type of object?

• A. This object contains user-defined criteria that monitor the running of business plans.
• B. This object provides a single value for a unique planning combination.
• C. This type of key figure is not usually stored and it cannot be set to editable.
• D. This object is not exposed to the user in planning views or modeling.

Answer: B

NEW QUESTION # 57
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.

• A. Simulation Chart Types
• B. Geographic Chart Types
• C. Comparison Chart Types
• D. Trend Chart Types
• E. Seasonal Chart Types

Answer: C,D,E

NEW QUESTION # 58
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.

• A. Demand sensing of demand data using predictive analytics tools
• B. Consideration of demand-driven analysis for buffer positioning.
• C. Detailed statistical analysis of demand data using predictive analytics tools
• D. Embedded, on-the-fly demand analytics

Answer: C,D

NEW QUESTION # 59
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.

• A. Reorder Point
• B. Recommended Safety Stock
• C. Target Cycle Stock
• D. Target Pipeline Stock
• E. Component Usage

Answer: B,C,D

NEW QUESTION # 60
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.

• A. SOURCECUSTGROUP
• B. SOURCECUSTOMER
• C. SOURCEPRODUCTION
• D. SOURCELOCATION

Answer: B,D

NEW QUESTION # 61
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.What are the integration tools that you can use with such a setup for data transfer?Note: There are 2 correct answers to this question.

• A. Cloud Integration for Data Services
• B. Cloud Identity Authentication Service
• C. Real-time Integration
• D. Smart Data Integration

Answer: A,D

NEW QUESTION # 62
You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.Which methods can you use?Note: There are 3 correct answers to this question.

• A. Disaggregation according to an equal split
• B. Proportional disaggregation by using KF2 in the expression
• C. Disaggregation according to a helper key figure
• D. Disaggregation according to a user-defined expression
• E. Disaggregation in batch triggered by an application job

Answer: A,B,D

NEW QUESTION # 63
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.

• A. Time profile level
• B. Global cost factors
• C. Processing mode
• D. Discretization

Answer: B,C

NEW QUESTION # 64
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.

• A. Only attribute-based totals can be added to the planning view.
• B. The total number of attributes that can use subtotals in the planning view can be restricted.
• C. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
• D. The total value can be added before or after the selected attribute.

Answer: B,D

NEW QUESTION # 65
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.

• A. You can only apply one value-based filter per planning view.
• B. The alerts dashboard is not available if a value-based filter is set for the open planning view.
• C. You can add (or delete) planning objects to a planning view after these filters are applied.
• D. These filters are always applied based on the values stored in the database.
• E. These filters can be used together with attribute totals in the same planning view.

Answer: A,B,D

NEW QUESTION # 66
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.

• A. Both periods and profiles have start and end dates.
• B. Periods are identified by an alphanumeric prefix and profiles by an integer.
• C. Periods are identified by an integer and profiles by an alphanumeric prefix.
• D. Both periods and profiles are identified by a unique integer.

Answer: B,C

NEW QUESTION # 67
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?

• A. Download the Initial Problem Report in the Data Integration app.
• B. Download the Rejection Report in the Data Integration app.
• C. Navigate to the Manage Master Data app and open the Log.
• D. Navigate to the Master Data Workbook in Excel and open the Log.

Answer: C

NEW QUESTION # 68
......

Maximum Grades By Making ready With C_IBP_2208 Dumps: https://www.dumptorrent.com/C_IBP_2208-braindumps-torrent.html

Prepare C_IBP_2208 Exam Questions Recently Updated Questions: https://drive.google.com/open?id=1LUxb2zo95OoNJ2LXPyGdUYZNVRgd5HYa