Get VCS-278 Braindumps & VCS-278 Real Exam Questions
Veritas VCS-278 Actual Questions and Braindumps
Veritas NetBackup Administration Exam Certification Details:
| Exam Code | VCS-278 |
| Schedule Exam | Pearson VUE |
| Duration | 105 mins |
| Passing Score | 65% |
| Sample Questions | Veritas NetBackup Administration Sample Questions |
| Exam Price | $225 (USD) |
| Exam Name | Veritas Certified Specialist (VCS) - NetBackup |
| Number of Questions | 75 - 85 |
NEW QUESTION 70
Consider the configuration information for a single UNIX client displayed below.
Allow Multiple Data Streams is enabled. ALL_LOCAL_DRIVES is specified.
Media multiplexing is set to 6.
Three tape drives are available in the storage unit and multiplex per drive is 2.
Max Jobs per Client is set to 8.
The client has five local file systems with no exclude list.
How many concurrent data streams will there be when the policy runs?
- A. six
- B. five
- C. two
- D. eight
- E. three
Answer: B
NEW QUESTION 71
Which feature is unavailable for all NetBackup cloud providers when configuring cloud storage using the Cloud Storage Server Configuration wizard?
- A. Spanning volumes
- B. Encryption
- C. Use Secure Sockets Layer
- D. Compression
Answer: A
NEW QUESTION 72
An administrator is attempting to protect 500TB of Windows file system data in a 4-hour backup window, when the file servers are idle. The daily change rate for the data is below 1%, and an Initial full backup has been performed to a high performance disk array configured as an Advanced Disk storage unit.
What can the administrator do to ensure subsequent backups complete within the backup window?
- A. configure multiplexing
- B. configure Synthetic backups
- C. configure client-side deduplication
- D. configure NetBackup Accelerator
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 73
How is the expiration date of an imported image determined during an import?
- A. By using the import date plus the origin retention
- B. By using the original backup date plus the original retention
- C. By using the original backup date plus infinity
- D. By using the import date plus seven years
Answer: A
Explanation:
Explanation
https://www.veritas.com/content/support/en_US/article.100017201.html
NEW QUESTION 74
Which schedule type is unsupported for a NetBackup catalog backup policy?
- A. Differential Incremental backup with a "Frequency" schedule
- B. Full backup with an "After each backup session" schedule
- C. Cumulative Incremental backup with an "After each backup session" schedule
- D. Differential Incremental backup with a "Calendar" schedule
Answer: C
Explanation:
Explanation/Reference: https://www.veritas.com/support/en_US/article.100029886
NEW QUESTION 75
Exclude dates are not available in frequency-based schedules.
- A. True
- B. False
Answer: B
NEW QUESTION 76
An administrator performing a backup and receives the following error message:
129 Message: Disk storage unit is full.
Which NetBackup command should the administrator use to report the potential space of advancedDisk storage units?
- A. Nbemmcmd
- B. bpdbclm
- C. Nbdiscover
- D. Nbdevquery
Answer: D
NEW QUESTION 77
Which two pools are created by default in the NetBackup? (Choose two.)
- A. Default pool
- B. DataStore pool
- C. Scratch pool
- D. CatalogBackup pool
- E. Deduplication pool
Answer: B,D
Explanation:
Explanation
NEW QUESTION 78
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully, even though the policy Backup Selections are NOT modified, the backup job fails the next day with the following status code:
Error 71: none of the files in the file list exist.
What is a possible reason the job failed?
- A. The Enable granular recovery option was unset.
- B. The client was temporarily shut down.
- C. The file systems have been unmounted on the client.
- D. The client was added to another backup policy.
Answer: C
NEW QUESTION 79
What are the minimal policy directive(s) to ensure all components of a Windows server system are protected when performing a backup?
- A. ALL_LOCAL_DRIVESand System State:\and Shadow Copy Components:\
- B.
- C. ALL_LOCAL_DRIVESand Shadow Copy Components:\
ALL_LOCAL_DRIVES - D. ALL_LOCAL_DRIVESand System State:\
Answer: B
NEW QUESTION 80
An administrator has a Synthetic backup that fails with a status code 1. And the error message:
No image were found to synthesize (607)
Which steps should the administrator take to determine why the backup failed?
- A. Check the policy backup selection list
- B. Check the policy schedules
- C. Check the schedule Storage Unit for compatibility
- D. Check the client attribute in Host properties
Answer: C
NEW QUESTION 81
Which command starts the NetBackup services on Windows?
- A. The bpup command
- B. The bp.start_all command
- C. The netbackup start command
- D. The bpup all command
- E. The start services command
Answer: A
Explanation:
Explanation
None of the other commands are valid on a Windows NetBackup host, some are valid on UNIX.
NEW QUESTION 82
An administrator must recover an expired image from a tape where only one remaining copy exists and there are other unexpired images on the tape.
How should the administrator locate the tape which contains the image?
- A. run the Tape Summary report
- B. run the Tape Contents report
- C. run the Images on Tape report
Answer: B
Explanation:
Explanation
NEW QUESTION 83
Some NetBackup jobs are affected by the failure of a disk in an AdvancedDisk pool, but the jobs are unavailable to view in the Activity Monitor.
In which two places can the administrator view NetBackup jobs affected by the disk failure? (Choose two.)
- A. NetBackup Management > Reports > Disk Reports > Disk Storage Unit Status
- B. Media and Device Management > Device Monitor > Disk Pool
- C. NetBackup Management > Reports > Media Logs
- D. NetBackup Management > Reports > Disk Reports > Disk Pool Status
- E. NetBackup Management > Reports > Disk Reports > Disk Logs
Answer: C,E
NEW QUESTION 84
Which command should an administrator use to view the expiry date of the local host-ID based certificate?
- A. nbcertcmd -listCertDetails
- B. nbcertcmd -listCACertDetails
- C. bpclntcmd -self
- D. nbcertcmd -hostSelfCheck
Answer: B
Explanation:
Explanation/Reference: https://www.veritas.com/support/en_US/article.100043900
NEW QUESTION 85
An administrator has an environment that runs over one thousand jobs a night. Some nights there are hundreds of jobs queued waiting for a resource.
Which action should the administrator take in the event that specific queued jobs need to run when a resource next becomes available during that evening's backup session?
- A. change the job priority for the job in the policy
- B. increment the job priority in the Activity Monitor for the job
- C. suspend the job and resume the job after changing the policy job priority
- D. change the job order in the job hierarchy
Answer: B
NEW QUESTION 86
What are considerations in data protection planning?
- A. Maximizing the availability of data
- B. All of the above
- C. Backup window availability
- D. Protecting systems and applications
- E. Retention periods
Answer: B
NEW QUESTION 87
An administrator has a Linux client that has a backup job failing with the following error message:
bpbim Exit client backup ESIT STATUS 41: network connection timed out
Which step should the administrator perform to ensure the backup job completers successfully?
- A. edit the "Client connect timeout" in the master server Host Properties
- B. add a SERVER entry for the media server in the client's bp.conf file
- C. check the firewall settings to ensure Not Backup ports are open
- D. edit the "Client read timeout" setting in the master server Host Properties
Answer: D
NEW QUESTION 88
......
VCS-278 Dumps To Pass Veritas Exam in 24 Hours - DumpTorrent: https://www.dumptorrent.com/VCS-278-braindumps-torrent.html