Juniper JN0-1361 Deluxe Study Guide with Online Test Engine
JN0-1361 dumps review - Professional Quiz Study Materials
Juniper JN0-1361 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 30
Exhibit:
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- B. You must implement GRE over IPsec to establish routing protocols across the circuit.
- C. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- D. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
Answer: B
NEW QUESTION 31
You are asked to provide a proposal for a service provider's OSPF network. The customer is concerned about the volume of link-state advertisements within their network and want to limit this traffic.
Given this scenario which design component would satisfy the customer's requirement?
- A. Use multiple areas.
- B. Use the same AS number.
- C. Use multiple levels.
- D. Use the same router IDs.
Answer: A
NEW QUESTION 32
You work for a service provider that offers L3VPN services to its customers. While designing L3VPN solutions for customers, you sometimes need to share routes between routing instances as part of the design.
What are two reasons for sharing routes between routing-instances? (Choose two)
- A. to support network address translation
- B. to allow the service provider's OoB network to be reachable by customers
- C. so customers can reach the service provider's public cloud infrastructure
- D. so customers can reach the Internet
Answer: C,D
NEW QUESTION 33
You have a customer that operates multiple branch offices and they want a low cost access solution. The WAN must be secure What would satisfy their requirement?
- A. an encrypted MPLS service
- B. an IPsec VPN using broadband connections
- C. a private WAN
- D. a managed MPLS service
Answer: B
NEW QUESTION 34
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. Distributed Cloud CPE - Managed Internet
- B. SD-WAN
- C. Centralized Cloud CPE
- D. Distributed Cloud CPE - Option 1
Answer: D
NEW QUESTION 35
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge. Which two statements are correct in this scenario? (Choose two )
- A. The VRRP master and backup send advertisements to each other at regular intervals.
- B. VRRP dynamically elects master and backup routers
- C. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
- D. VRRP will only support two routers
Answer: A,B
NEW QUESTION 36
What are three components of a class-of-service scheduler? (Choose three.)
- A. policing rate
- B. queue priority
- C. forwarding class
- D. delay buffer size
- E. transmit rate
Answer: B,D,E
Explanation:
Junos OS schedulers allow you to define the priority, bandwidth, delay buffer size, rate control status, and RED drop profiles to be applied to a particular queue for packet transmission
NEW QUESTION 37
Exhibit:
You work for service provider B that wants to implement a hot potato routing policy on the network so that router C uses link C-A to reach service provider A's advertised routes and router D uses link D-B to reach Service Provider A's advertised routes Currently traffic from router C is traversing the core to exit the network on router B .
Referring to the exhibit, what are two design actions that would satisfy the requirements? (Choose two.)
- A. Implement BGP-ORR
- B. Configure the route reflector to send multiple copies of a route learned from different IBGP peers to its clients.
- C. Configure new IBGP neighbors between routers C and A and routers D and B
- D. Implement BGP-LS
Answer: B,C
NEW QUESTION 38
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Juniper Secure Analytics
- B. Junosphere
- C. Junos Space
- D. Junoscope
Answer: C
NEW QUESTION 39
Which two statements about BFD are correct? (Choose two)
- A. BFD modifies each protocol timer to improve link failure detection.
- B. GRES is required for BFD sessions to be established.
- C. NSR maintains BFD sessions during Routing Engine switchover.
- D. BFD provides link failure detection for static routes.
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/policy-bfd-static-routes.html
https://www.juniper.net/documentation/en_US/junos/topics/reference/requirements/nsr-systemrequirements.html#section-nonstop-routing-bfd-support
NEW QUESTION 40
Exhibit:
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
- B. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- C. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
- D. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
Answer: A,C
NEW QUESTION 41
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
- A. Prepend your AS number multiple times on the prefix advertised to SP-B.
- B. Advertise the prefix to SP-B with a higher local preference.
- C. Prepend your AS number multiple times on the prefix advertised to SPA.
- D. Advertise the prefix to SP-A with a higher local preference.
Answer: A
NEW QUESTION 42
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service. Which solution would satisfy the customer's requirement?
- A. an EVPN service provided over IP
- B. a routed service
- C. an L3VPN service
- D. an IPsec VPN service between CE routers
Answer: C
NEW QUESTION 43
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?
- A. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
- B. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
- C. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
- D. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.
Answer: A
NEW QUESTION 44
You are designing a service provider core network As part of the design, you must ensure that the MPLS network utilizes the traffic engineering database (TED) for path selection and resiliency. You have chosen OSPF as the IGP for your design.
In this scenario which statement is correct?
- A. OSPF populates the TED by default.
- B. You must enable traffic engineering in OSPF to populate the TED.
- C. OSPF cannot be used to populate the TED.
- D. You must disable traffic engineering in OSPF to use the TED.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/example/ospf-traffic-engineeringenabling.html
NEW QUESTION 45
Which statement is correct regarding classifiers in CoS?
- A. Classifiers are used to route traffic between routing instances.
- B. Classifiers are used to separate traffic into different forwarding classes.
- C. Classifiers are used to define the transmit rate for forwarding classes.
- D. Classifiers are used to change DiffServ values on outgoing packets.
Answer: B
NEW QUESTION 46
Exhibit:
You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?
- A. Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.
- B. Force the ISP A to ISP D traffic over RSVP-signaled LSPs.
- C. Force the ISP A to ISP D traffic over LDP-signaled LSPs.
- D. Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.
Answer: B
NEW QUESTION 47
You are designing a multi-site data center environment with data center interconnects between sites.
Which two statements are true in this scenario? (Choose two. )
- A. All data centers must be in the same Layer 2 broadcast domain and subnet.
- B. EVPN with VXLAN can be used to interconnect the multiple sites.
- C. VPLS can be used to interconnect the multiple sites.
- D. The data centers must be connected with a full mesh design.
Answer: B,C
NEW QUESTION 48
Exhibit:
Which routing protocol design will accomplish these goals?
- A. Enable a full mesh of IBGP sessions between the routers in ISP B.
- B. Configure static routes to ISP A on each router within ISP B.
- C. Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP B.
- D. Configure each router in ISP B to peer with a par of route reflectors.
Answer: D
NEW QUESTION 49
......
Exam Questions Answers Braindumps JN0-1361 Exam Dumps PDF Questions: https://www.dumptorrent.com/JN0-1361-braindumps-torrent.html