[Nov-2024] Fortinet FCP_FCT_AD-7.2 Dumps – Reduce Your Chance of Failure in FCP_FCT_AD-7.2 Exam

To help you achieve your ultimate goal, we suggest the actual Fortinet FCP_FCT_AD-7.2 dumps for your FCP—FortiClient EMS 7.2 Administrator exam preparation to use as your guideline.

NEW QUESTION # 34
An administrator installs FortiClient on Windows Server.
What is the default behavior of real-time protection control?

• A. Real-time protection must update the signature database from FortiSandbox
• B. Real-time protection sends malicious files to FortiSandbox when the file is not detected locally
• C. Real-time protection is disabled
• D. Real-time protection must update AV signature database

Answer: C

Explanation:
When FortiClient is installed on a Windows Server, the default behavior for real-time protection control is:
* Real-time protection is disabled:By default, FortiClient does not enable real-time protection on server installations to avoid potential performance impacts and because servers typically have different security requirements compared to client endpoints.
Thus, real-time protection is disabled by default on Windows Server installations.
References
* FortiClient EMS 7.2 Study Guide, Real-time Protection Section
* Fortinet Documentation on FortiClient Default Settings for Server Installations

NEW QUESTION # 35
Exhibit.

Refer to the exhibits, which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-User* on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?

• A. Change the FortiClient system settings to enable lag visibility.
• B. Change the FortiClient EMS shared settings to enable tag visibility.
• C. Update tagging rule logic to enable tag visibility.
• D. Change the endpoint alerts configuration to enable tag visibility.

Answer: D

Explanation:
Observation of Exhibits:
The exhibits show the Zero Trust Tag Monitor on FortiClient EMS and the FortiClient GUI status.
Remote-Client is tagged as "Remote-Endpoints" on the FortiClient EMS Zero Trust Tag Monitor.
Enabling Tag Visibility:
To show the tag on the FortiClient GUI, the endpoint alerts configuration must be adjusted to enable tag visibility.
Verification:
The correct action is to change the endpoint alerts configuration to enable tag visibility, ensuring that the tag appears in the FortiClient GUI.
Reference:
FortiClient EMS and FortiClient configuration documentation from the study guides.

NEW QUESTION # 36
Which two third-party tools can an administrator use to deploy FortiClient? (Choose two.)

• A. B. Microsoft SCCM
• B. QR code generator
• C. Microsoft Windows Installer
• D. C. Microsoft Active Directory GPO

Answer: A,D

Explanation:
Administrators can use several third-party tools to deploy FortiClient:
* Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.
* Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.
These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.
References
* FortiClient EMS 7.2 Study Guide, FortiClient Deployment Section
* Fortinet Documentation on FortiClient Deployment using SCCM and GPO

NEW QUESTION # 37
Which two third-party tools can an administrator use to deploy FortiClient? (Choose two.)

• A. Microsoft SCCM
• B. Microsoft Active Directory GPO
• C. QR code generator
• D. Microsoft Windows Installer

Answer: A,B

Explanation:
Administrators can use several third-party tools to deploy FortiClient:
Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.
Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.
These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.
Reference
FortiClient EMS 7.2 Study Guide, FortiClient Deployment Section
Fortinet Documentation on FortiClient Deployment using SCCM and GPO

NEW QUESTION # 38
Exhibit.

Based on the FortiClient logs shown in the exhibit, which endpoint profile policy is currently applied lo the ForliClient endpoint from the EMS server?

• A. Fortinet-Training
• B. Default configuration policy c
• C. Default
• D. Compliance rules default

Answer: A

Explanation:
* Observation of Logs:
* The logs show a policy named "Fortinet-Training" being applied to the endpoint.
* Evaluating Policies:
* The log entries indicate that the "Fortinet-Training" policy was received and applied.
* Conclusion:
* Based on the logs, the currently applied policy on the FortiClient endpoint is "Fortinet-Training".
References:
* FortiClient EMS policy configuration and log analysis documentation from the study guides.

NEW QUESTION # 39
FortiClient EMS endpoint policies

Refer to the exhibit, which shows multiple endpoint policies on FortiClient EMS. Which policy is applied to the endpoint in the AD group trainingAD

• A. The Default policy because it has the highest priority
• B. The Training policy
• C. Both the Sales and Training policies because their priority is higher than the Default policy
• D. The sales policy

Answer: B

Explanation:
Observation of Endpoint Policies:
The exhibit shows multiple endpoint policies with their assigned groups, priority levels, and enabled status.
Evaluating Policy Assignment:
The Training policy is specifically assigned to the "trainingAD.training.lab" group, with a higher priority than the Default policy.
Conclusion:
The correct policy applied to the endpoint in the AD group "trainingAD" is the Training policy (A).
Reference:
FortiClient EMS policy configuration and priority management documentation from the study guides.

NEW QUESTION # 40
Refer to the exhibits.


Based on the FortiGate Security Fabric settings shown in the exhibits, what must an administrator do on the EMS server to successfully quarantine an endpoint. when it is detected as a compromised host (loC)?

• A. The administrator must authorize FortiGate on FortiAnalyzer.
• B. The administrator must enable SSH access to EMS.
• C. The administrator must enable remote HTTPS access to EMS.
• D. The administrator must enable FQDN on EMS.

Answer: C

Explanation:
Based on the FortiGate Security Fabric settings shown in the exhibits, to successfully quarantine an endpoint when it is detected as a compromised host (IOC), the following step is required:
* Enable Remote HTTPS Access to EMS:This setting allows FortiGate to communicate securely with FortiClient EMS over HTTPS. Remote HTTPS access is essential for the quarantine functionality to operate correctly, enabling the EMS server to receive and act upon the quarantine commands from FortiGate.
Therefore, the administrator must enable remote HTTPS access to EMS to allow the quarantine process to function properly.
References
* FortiGate Infrastructure 7.2 Study Guide, Security Fabric and Integration with EMS Sections
* Fortinet Documentation on Enabling Remote HTTPS Access to FortiClient EMS

NEW QUESTION # 41
Which two VPNtypes can a FortiClientendpoint user inmate from the Windows command prompt? (Choose two)

• A. SSL VPN
• B. L2TP
• C. PPTP
• D. IPSec

Answer: A,D

Explanation:
FortiClient supports initiating the following VPN types from the Windows command prompt:
* IPSec VPN:FortiClient can establish IPSec VPN connections using command line instructions.
* SSL VPN:FortiClient also supports initiating SSL VPN connections from the Windows command prompt.
These two VPN types can be configured and initiated using specific command line parameters provided by FortiClient.
References
* FortiClient EMS 7.2 Study Guide, VPN Configuration Section
* Fortinet Documentation on Command Line Options for FortiClient VPN

NEW QUESTION # 42
Refer to the exhibit.

Based on the Security Fabric automation settings, what action will be taken on compromised endpoints?

• A. Endpoints will be banned on FortiGate
• B. An email notification will be sent for compromised endpoints
• C. Endpoints will be quarantined through FortiSwitch
• D. Endpoints will be quarantined through EMS

Answer: D

Explanation:
Based on the Security Fabric automation settings shown in the exhibit:
* The automation stitch is configured with a trigger for a "Compromised Host."
* The action specified for this trigger is "Quarantine FortiClient via EMS."
* This indicates that when an endpoint is detected as compromised, FortiClient EMS will quarantine the endpoint as part of the automation process.
Therefore, the action taken on compromised endpoints will be to quarantine them through EMS.
References
* FortiGate Security 7.2 Study Guide, Automation Stitches and Actions Section
* Fortinet Documentation on Configuring Automation Stitches and Quarantine Actions

NEW QUESTION # 43
Refer to the exhibit, which shows FortiClient EMS deployment, profiles.

When an administrator creates a deployment profile on FortiClient EMS. which statement about the deployment profile is true?

• A. Deployment-1 will upgrade FortiClient only on the workgroup.
• B. Deployment-1 will install FortiClient on new AO group endpoints.
• C. Deployment-2 will install FortiClient on both the AD group and workgroup.
• D. Deployment-2 will upgrade FortiClient on both the AD group and workgroup.

Answer: D

Explanation:
* Deployment Profiles Analysis:
* Deployment-1 has the "First-Time-Installation" package and is assigned to "All Groups" with a priority of 1 but is not enabled.
* Deployment-2 has the "To-Upgrade" package, is assigned to both "All Groups" and "trainingAD.
training.lab," with a priority of 2 and is enabled.
* Evaluating Deployment-2:
* Deployment-2 will upgrade FortiClient on both "All Groups" and "trainingAD.training.lab" since it is enabled and assigned to these groups. This includes both AD (Active Directory) groups and workgroups.
* Conclusion:
* Since Deployment-2 is set to upgrade FortiClient on all the assigned groups and workgroups, the correct answer is A.
References:
* FortiClient EMS deployment and profile documentation from the study guides.

NEW QUESTION # 44
An administrator is required to maintain a software vulnerability on the endpoints, without showing the feature on the FortiClient. What must the administrator do to achieve this requirement?

• A. Disable select the vulnerability scan feature in the deployment package
• B. Click the hide icon on the vulnerability scan profile assigned to endpoint
• C. Select the vulnerability scan feature in the deployment package, but disable the feature on the endpoint profile
• D. Use the default endpoint profile

Answer: B

NEW QUESTION # 45
A new chrome book is connected in a school's network.
Which component can the EMS administrator use to manage the FortiClient web filter extension installed on the Google Chromebook endpoint?

• A. FortiClient EMS
• B. FortiClient web filter extension
• C. FortiClient customer URL list
• D. FortiClient site categories

Answer: A

Explanation:
For managing the FortiClient web filter extension installed on the Google Chromebook endpoint, the EMS administrator can use the following component:
FortiClient EMS (Enterprise Management Server) is designed to manage and control multiple FortiClient installations across various endpoints.
EMS provides centralized management for endpoint policies, including web filtering configurations.
The EMS administrator can configure and enforce web filter policies on Chromebooks through the EMS console.
Therefore, FortiClient EMS is the correct component for managing the web filter extension on Google Chromebook endpoints.
Reference
FortiClient EMS 7.2 Study Guide, Chromebook Management Section
Fortinet Documentation on FortiClient EMS and Web Filtering for Chromebooks

NEW QUESTION # 46
Refer to the exhibit.

Based on the settings shown in the exhibit, which action will FortiClient take when users try to access www facebook com?

• A. FortiClient will allow access to Facebook.
• B. FortiClient will block access to Facebook and its subdomains.
• C. FortiClient will monitor only the user's web access to the Facebook website
• D. FortiClient will prompt a warning message to want the user before they can access the Facebook website

Answer: A

Explanation:
Observation of Web Filter Exclusions:
The exhibit shows a web filter exclusion for "*.facebook.com" with the action set to "Allow." Evaluating Actions:
This configuration means that FortiClient will allow access to Facebook and its subdomains.
Conclusion:
When users try to access "www.facebook.com," FortiClient will allow the access based on the web filter exclusion settings.
Reference:
FortiClient web filter configuration and exclusion documentation from the study guides.

NEW QUESTION # 47
An administrator wants to simplify remote access without asking users to provide user credentials Which access control method provides this solution?

• A. ZTNA IP/MAC littering mode
• B. L2TP
• C. ZTNA full mode
• D. SSL VPN

Answer: C

Explanation:
Simplifying Remote Access:
The administrator wants to simplify remote access without asking users to provide user credentials.
Evaluating Access Control Methods:
ZTNA full mode can provide seamless access by leveraging device identity and posture, eliminating the need for user credentials for each access request.
Other methods like SSL VPN and L2TP typically require user credentials.
Conclusion:
The correct access control method that provides this solution is ZTNA full mode.
Reference:
ZTNA section in the FortiGate Infrastructure 7.2 Study Guide.

NEW QUESTION # 48
Refer to the exhibits.


Which shows the configuration of endpoint policies.
Based on the configuration, what will happen when someone logs in with the user account student on an endpoint in the trainingAD domain?

• A. FortiClient EMS will assign the Default policy
• B. FortiClient EMS will assign the Sales policy
• C. FortiClient EMS will assign the Training policy
• D. FortiClient EMS will assign the Training policy for on-fabric endpoints and the Sales policy for the off- fabric endpoint

Answer: C

Explanation:
Based on the configuration shown in the exhibits:
* There are three endpoint policies configured: Training, Sales, and Default.
* The "Training" policy is assigned to the "trainingAD.training.lab" group.
* The "Sales" policy is assigned to "All Groups" and "trainingAD.training.lab/student."
* The "Default" policy has no specific groups assigned.
When someone logs in with the user account "student" on an endpoint in the "trainingAD" domain:
* The "Training" policy is specifically assigned to the "trainingAD.training.lab" group.
* The "Sales" policy includes "trainingAD.training.lab/student" but not the general "trainingAD.training.
lab" group.
* The system will prioritize the most specific match for the group.
Therefore, FortiClient EMS will assign the "Training" policy to the "student" account logging into the
"trainingAD" domain as it matches the group "trainingAD.training.lab" directly.
References
* FortiClient EMS 7.2 Study Guide, Endpoint Policy Configuration Section
* FortiClient EMS Documentation on Group Policy Assignment and Matching

NEW QUESTION # 49
Which two statements are true about the ZTNA rule? (Choose two.)

• A. It applies security profiles to protect traffic
• B. It defines the access proxy.
• C. It applies SNAT to protect traffic.
• D. It enforces access control.

Answer: A,D

Explanation:
Understanding ZTNA Rule Configuration:
The ZTNA rule configuration shown in the exhibit defines how traffic is managed and controlled based on specific tags and conditions.
Evaluating Rule Components:
The rule includes security profiles to protect traffic by applying various security checks (A).
The rule also enforces access control by determining which endpoints can access the specified resources based on the ZTNA tag (D).
Eliminating Incorrect Options:
SNAT (Source Network Address Translation) is not mentioned as part of this ZTNA rule.
The rule does not define the access proxy but uses it to enforce access control.
Conclusion:
The correct statements about the ZTNA rule are that it applies security profiles to protect traffic (A) and enforces access control (D).
Reference:
ZTNA rule configuration documentation from the study guides.

NEW QUESTION # 50
......

100% Free FCP_FCT_AD-7.2 Demo-Trial [Pdf], get it now: https://drive.google.com/open?id=1dqg9JLeOQ8c1TdxhVHQXlEyEIUK8BJIt

Accurate & Verified Answers As Seen in the Real Exam here: https://www.dumptorrent.com/FCP_FCT_AD-7.2-braindumps-torrent.html