[Oct-2024] Dumps Practice Exam Questions Study Guide for the NSE7_OTS-7.2 Exam

NSE7_OTS-7.2 Dumps with Practice Exam Questions Answers

Earning the Fortinet NSE7_OTS-7.2 certification demonstrates a high level of expertise in OT security and can help professionals advance their careers. Certified individuals are recognized as experts in the field and are equipped to design, implement, and manage secure OT networks. Fortinet NSE 7 - OT Security 7.2 certification is also a valuable asset to organizations looking to demonstrate their commitment to securing their OT systems and protecting against cyber threats.

 

NEW QUESTION # 38
Refer to the exhibit.

Given the configurations on the FortiGate, which statement is true?

• A. FortiGate is configured with forward-domains to forward only company domain website traffic.
• B. FortiGate is configured with forward-domains to reduce unnecessary traffic.
• C. FortiGate is configured with forward-domains to forward only domain controller traffic.
• D. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.

Answer: B

NEW QUESTION # 39
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

• A. The FortiGate devices is in offline IDS mode.
• B. Port5 is not a member of the software switch.
• C. The FortiGate-Edge device must be in NAT mode.
• D. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

Answer: C,D

NEW QUESTION # 40
A supervisor is configuring a software switch on a FortiGate device. What must the supervisor configure on FortiGate to control the traffic between member interfaces on the software switch, using firewall policies?

• A. The supervisor must configure a separate forward domain for the software switch.
• B. The supervisor must configure intra-switch-policy to explicit.
• C. The supervisor must configure the software switch with at least one wireless interface and one VLAN interface.
• D. The supervisor must add different VLAN interfaces to the software switch.

Answer: B

NEW QUESTION # 41
Which type of attack posed by skilled and malicious users of security level 4 (SL 4) of IEC 62443 is designed to defend against intentional attacks?

• A. Users with low access to resources
• B. Users with substantial resources
• C. Users with access to moderate resources
• D. Users with unintentional operator error

Answer: D

NEW QUESTION # 42
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs.
All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?

• A. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
• B. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
• C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
• D. In order to communicate, PLC1 must be in the same VLAN as PLC2.

Answer: C

Explanation:
The statement that is true about the traffic between PLC1 and PLC2 is that PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.

NEW QUESTION # 43
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?

• A. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
• B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
• C. Create a notification policy and define a script/remediation on FortiSIEM.
• D. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.

Answer: C

Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript

NEW QUESTION # 44
Refer to the exhibit.

Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)

• A. FortiSIEM for security incident and event management
• B. FortiNAC for network access control
• C. FortiGate for application control and IPS
• D. FortiEDR for endpoint detection
• E. FortiGate for SD-WAN

Answer: B,C,D

NEW QUESTION # 45
As an OT network administrator, you are managing three FortiGate devices that each protect different levels on the Purdue model. To increase traffic visibility, you are required to implement additional security measures to detect exploits that affect PLCs. Which security sensor must implement to detect these types of industrial exploits?

• A. Deep packet inspection (DPI)
• B. Antivirus inspection
• C. Intrusion prevention system (IPS)
• D. Application control

Answer: A

NEW QUESTION # 46
Refer to the exhibit and analyze the output.

Which statement about the output is true?

• A. This is a sample of a PAM event type.
• B. This is a sample of an SNMP temperature control event log.
• C. This is a sample of FortiGate interface statistics.
• D. This is a sample of a FortiAnalyzer system interface event log.

Answer: A

NEW QUESTION # 47
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?

• A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
• B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
• C. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
• D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.

Answer: B

Explanation:
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network

NEW QUESTION # 48
What can be assigned using network access control policies?

• A. Logical networks
• B. Profiling rules
• C. FortiNAC device polling methods
• D. Layer 3 polling intervals

Answer: A

NEW QUESTION # 49
Refer to the exhibit.

The IPS profile is added on all of the security policies on FortiGate.
For an OT network, which statement of the IPS profile is true?

• A. The IPS profile inspects only traffic originating from SCADA equipment.
• B. FortiGate has no IPS industrial signature database enabled.
• C. All IPS signatures are overridden and must block traffic match signature patterns.
• D. The listed IPS signatures are classified as SCADAapphcat nns

Answer: D

NEW QUESTION # 50
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?

• A. Two-factor authentication is not configured with RADIUS authentication method
• B. The user was determined by Security Fabric
• C. FortiNAC determined the user by DHCP fingerprint method
• D. FortiGate determined the user by passive authentication

Answer: D

NEW QUESTION # 51
An OT customer is using multiple FortiGate devices in their network to implement two-factor authentication with hardware FortiTokens. A supervisor is carrying multiple FortiTokens to be used when logging in to a critical server behind different FortiGate devices.
As an OT network architect, which approach must you take in order to assign one token per user and still use two-factor authentication on multiple FortiGate devices?

• A. Configure FSSO-based two-factor authentication.
• B. Implement FortiAuthenticator with FortiTokens provisioned for each user, and configure FortiAuthenticator as remote authentication server on all FortiGate devices in the OT network.
• C. Implement a FortiManager and manage all FortiGate devices in the OT network to share the FortiTokens database.
• D. Provision the Edge-FortiGate device with all the FortiTokens and configure it as a remote authentication server on other FortiGate devices.

Answer: B

NEW QUESTION # 52
Refer to the exhibit and analyze the output.

Which statement about the output is true?

• A. This is a sample of a PAM event type.
• B. This is a sample of an SNMP temperature control event log.
• C. This is a sample of FortiGate interface statistics.
• D. This is a sample of a FortiAnalyzer system interface event log.

Answer: A

NEW QUESTION # 53
......

Fortinet NSE7_OTS-7.2 exam is a certification test designed for IT professionals who specialize in the field of operational technology (OT) security. NSE7_OTS-7.2 exam is part of the Fortinet Network Security Expert (NSE) 7 certification program, and it focuses on testing the candidate’s knowledge and skills in securing OT networks and devices.

 

Free NSE 7 Network Security Architect NSE7_OTS-7.2 Exam Question: https://www.dumptorrent.com/NSE7_OTS-7.2-braindumps-torrent.html

NSE7_OTS-7.2 by NSE 7 Network Security Architect Actual Free Exam Practice Test: https://drive.google.com/open?id=1otK87xvvudgf19q6PqJ6J4FVl_Es17-i