[Oct 24, 2021] 300-715 Exam Brain Dumps - Study Notes and Theory

Pass Cisco 300-715 Test Practice Test Questions Exam Dumps

Career Prospects and Annual Income for Accredited Individuals

Once you attain either the Cisco Certified Specialist - Security Identity Management Implementation or the CCNP Security qualification, you may try out different job roles that will develop your professional skills and will go with generous annual salaries. For example, according to PayScale, the yearly salary for a Security Engineer can reach heights of $135,000 while that of a Network Security Engineer can be as high as $127,000. The average income per annum of an IT Security Administrator is around $67,000 while that of an Information Security Analyst is somewhere about $73,000. A Cyber Security Analyst can earn as much as $117,000 annually whereas the median income of a Security Manager, IT can reach the heights of $148,000. Next, the yearly salary of a Director, IT Security ranges between $81,000 and $151,000, and for an Information Security Engineer that range will be $66,000 and $134,000. Also, the average median pay for a Network Security Analyst is $72,000 while for a Security Architect in IT, it's almost $125,000. So, if you are still pondering whether or not to pursue the Cisco Certified Specialist - Security Identity Management Implementation and the CCNP Security certificates, then these tempting figures might motivate you to do this.

Conclusion

If you want to excel and prove your skills in any profession, you must go the extra mile to show that you are qualified for your job. The Cisco 300-715 test stands out as a skill enabler for ISE specialists who want to hone their skills and make themselves industry-ready. With the right support from training in addition to revision guides, you will ace this exam in the initial try.

Career Prospects and Salary Outlook

Completing the Cisco 300-715 exam and obtaining one of the associated certificates gives you vast opportunities for your career advancement. After passing this test, you will have the solid knowledge and skills required for performing various network security tasks. Some of the job roles that are available to the successful candidates as well as the annual salary rates related to them are as follows:

• Project Manager, Information Technology (IT) – $35,000
• Technical Specialist – $81,000
• Senior Technical Consultant – $140,000
• Security Consultant, (Computing/Networking/Information Technology) – $160,000
• Network Specialist – $85,000
• Software Engineer/Developer/Programmer – $154,000
• Senior Systems Engineer – $106,000
• Systems Engineer (Computer Networking/IT) – $60,000
• Network Engineer – $83,000
• Network Manager – $131,000
• Program Manager, Software Applications – $145,000
• Network Engineer – $119,000
• Development Operations (DevOps) Engineer – $110,000
• Network Security Engineer – $105,000

Your exact remuneration will depend on numerous factors such as your previous professional background, location, the organization you work for, specific job title, among others. Anyway, with the certifications earned through passing the Cisco 300-715 exam, you stand a better chance of landing a prestigious and well-paying job in the security field.

 

NEW QUESTION 41
Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two )

• A. Security Group Tag
• B. Endpoint Family
• C. Policy Assignment
• D. Identity Group Assignment
• E. IP Address

Answer: C,D

 

NEW QUESTION 42
An administrator is creating a new TACACS sell. The users that get assigned this profile should have initial access privileges equivalent to user EXEC mode, and a max privilege level of privileged EXEC mode. How is this configured?
A)

B)

C)

D)

• A. Option B
• B. Option A
• C. Option C
• D. Option D

Answer: A

 

NEW QUESTION 43
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE.
The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?

• A. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
• B. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
• C. Conrm the authorization policies are correct using the test aaa authorization admin drop legacy command.
• D. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.

Answer: B

Explanation:
Explanation
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4

 

NEW QUESTION 44
Which are two characteristics of TACACS+? (Choose two ) ,

• A. It separates authorization and authentication functions.
• B. It uses TCP port 49.
• C. It encrypts the password only.
• D. It uses UDP port 49.
• E. It combines authorization and authentication functions.

Answer: C,E

 

NEW QUESTION 45
Which two default endpoint identity groups does Cisco ISE create? (Choose two )

• A. block list
• B. unknown
• C. endpoint
• D. allow list
• E. profiled

Answer: B,E

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE
* redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.

 

NEW QUESTION 46
Which scenario does not support Cisco ISE guest services?

• A. wireless LAN controller with central WebAuth
• B. wired NAD with central WebAuth
• C. wireless LAN controller with local WebAuth
• D. wired NAD with local WebAuth

Answer: D

 

NEW QUESTION 47
What must match between Cisco ISE and the network access device to successfully authenticate endpoints?

• A. certificate
• B. shared secret
• C. SNMP version
• D. profile

Answer: B

Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_network_devices.html

 

NEW QUESTION 48
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.

Answer:

Explanation:

https://www.mbne.net/tech-notes/aaa-tacacs-radius

 

NEW QUESTION 49
Refer to the exhibit:

Which command is typed within the CU of a switch to view the troubleshooting output?

• A. show authentication sessions mac 000e.84af.59af details
• B. show authentication registrations
• C. show authentication interface gigabitethemet2/0/36
• D. show authentication sessions method

Answer: A

 

NEW QUESTION 50
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.

Answer:

Explanation:

 

NEW QUESTION 51
Which two actions occur when a Cisco ISE server device administrator logs in to a device? (Choose two)

• A. The device queries the internal identity store
• B. The Cisco ISE server queries the internal identity store
• C. The Cisco ISE server queries the external identity store.
• D. The device queries the Cisco ISE authorization server
• E. The device queries the external identity store

Answer: A,C

 

NEW QUESTION 52
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?

• A. user-presented certificate and a certificate stored in Active Directory
• B. subject alternative name and the common name
• C. user-presented password hash and a hash stored in Active Directory
• D. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory

Answer: B

Explanation:
Reference:
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user. https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html

 

NEW QUESTION 53
A network engineer is configuring Cisco TrustSec and needs to ensure that the Security Group Tag is being transmitted between two devices Where in the Layer 2 frame should this be verified?

• A. 802.1Q filed
• B. 802.1 AE header
• C. CMD filed
• D. Payload

Answer: C

Explanation:
https://www.cisco.com/c/dam/global/en_ca/assets/ciscoconnect/2014/pdfs/policy_defined_segmentation_with_trustsec_rob_bleeker.pdf (slide 25)

 

NEW QUESTION 54
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?

• A. Add the root certificate authority to the trust store and enable it for authentication.
• B. Create a certificate signing request and have the root certificate authority sign it.
• C. Add an OCSP profile and configure the root certificate authority as secondary.
• D. Create an SCEP profile to link Cisco ISE with the root certificate authority.

Answer: D

 

NEW QUESTION 55
There is a need within an organization for a new policy to be created in Cisco ISE. It must validate that a specific anti-virus application is not only installed, but running on a machine before it is allowed access to the network. Which posture condition should the administrator configure in order for this policy to work?

• A. registry
• B. application
• C. file
• D. service

Answer: B

 

NEW QUESTION 56
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node.
Which persona should be configured with the largest amount of storage in this environment?

• A. Primary Administration
• B. Monitoring and Troubleshooting
• C. policy Services
• D. Platform Exchange Grid

Answer: A

 

NEW QUESTION 57
Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two)

• A. Connection Type
• B. Operating System
• C. iOS Settings
• D. Redirect ACL
• E. Windows Settings

Answer: A,B

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010101.html#reference_21024A3B2B27427EAC78495E56962729

 

NEW QUESTION 58
Refer to the exhibit Which component must be configured to apply the SGACL?

• A. ingress router
• B. host
• C. egress router
• D. secure server

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/trustsec/configuration/guide/trustsec/arch_over.html#52796

 

NEW QUESTION 59
An administrator is configuring new probes to use with Cisco ISE and wants to use metadata to help profile the endpoints. The metadata must contain traffic information relating to the endpoints instead of industry-standard protocol information Which probe should be enabled to meet these requirements?

• A. DHCP probe
• B. SNMP query probe
• C. DNS probe
• D. NetFlow probe

Answer: A

Explanation:
Explanation
http://www.network-node.com/blog/2016/1/2/ise-20-profiling

 

NEW QUESTION 60
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.

Answer:

Explanation:

Explanation

Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide

 

NEW QUESTION 61
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)

• A. RADIUS
• B. DHCP
• C. HTTP
• D. SNMP
• E. NetFlow

Answer: A,B

Explanation:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html

 

NEW QUESTION 62
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.

Answer:

Explanation:

 

NEW QUESTION 63
......

Verified 300-715 dumps Q&As - 300-715 dumps with Correct Answers: https://www.dumptorrent.com/300-715-braindumps-torrent.html

The Best CCNP Security Study Guide for the 300-715 Exam: https://drive.google.com/open?id=1O2kKJV4GwIGHWz2fz-Es2efrmKGIWBbV