Try Before You Buy

Download a free sample of any of our exam questions and answers

  • 24/7 customer support, Secure shopping site
  • Free One year updates to match real exam scenarios
  • If you failed your exam after buying our products we will refund the full amount back to you.

[Q27-Q43] Real Exam Questions 010-151 Dumps Exam Questions in here [Oct-2021]

Share

Real Exam Questions 010-151 Dumps Exam Questions in here [Oct-2021]

Get Latest Oct-2021 Conduct effective penetration tests using  010-151

NEW QUESTION 27
Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

  • A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
  • B. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
  • C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
  • D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

Answer: C

 

NEW QUESTION 28
Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?

  • A. QSFP28
  • B. Cisco CPAK
  • C. QSFP+
  • D. SFP+

Answer: C

 

NEW QUESTION 29
When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?

  • A. Click Host power, Click Shut down
  • B. Click Power off, Click Shut off
  • C. Click Power off, Click Shut down
  • D. Click Host power, Click Shut off

Answer: C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-0_1x/ b_Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1-0_1x/ Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1-
0_1x_chapter3.html#task_99CD607A55D6405BBCD4BB72AC93B5E2

 

NEW QUESTION 30
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #

  • A. Ctrl-C
  • B. end
  • C. exit
  • D. quit
  • E. Ctrl-L

Answer: B

 

NEW QUESTION 31
What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: E

 

NEW QUESTION 32

Refer to the exhibit. Which item does C represent?

  • A. GPU
  • B. Mini Storage Connector
  • C. CMOS Battery
  • D. Internal USB
  • E. mLOM Connector

Answer: B

Explanation:
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series- blade-servers/b200m5-specsheet.pdf

 

NEW QUESTION 33
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)

  • A. monitor
  • B. USB serial adapter
  • C. Cisco DB-9-to-RJ-45 console cable
  • D. KVM dongle
  • E. laptop
  • F. keyboard

Answer: A,D,F

 

NEW QUESTION 34
Refer to the exhibit.

Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?

  • A. A - ucsm
  • B. D - rack-server
  • C. C - fabric-extender
  • D. B - chassis

Answer: D

 

NEW QUESTION 35
Which statement about RAID is true?

  • A. RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks.
  • B. RAID provides data redundancy with either odd parity or even parity.
  • C. RAID parity information can be stored across multiple RAID levels.
  • D. RAID drive group appears to the host computer as multiple physical storage units.
  • E. RAID is a scheme used to logically combine several independent disks to form an array or group of drives.

Answer: E

 

NEW QUESTION 36
Refer to the exhibit.

This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?

  • A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
  • B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
  • C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
  • D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors

Answer: A

 

NEW QUESTION 37
Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)

  • A. RSH
  • B. TFTP
  • C. FTP
  • D. FTPS

Answer: B,C

 

NEW QUESTION 38
On the Sensors page from the CIMC view, which four tabs are displayed to view further information?
(Choose four.)

  • A. Temperature
  • B. CPU
  • C. LEDs
  • D. Memory
  • E. Power Supply
  • F. Fan

Answer: A,C,E,F

 

NEW QUESTION 39
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?

  • A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
  • B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
  • C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
  • D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280

Answer: C

 

NEW QUESTION 40
Refer to the exhibit.

Where is the best place to see bootflash free space?

  • A. C - Local Storage Information
  • B. D - High Availability Details
  • C. A - Available Memory
  • D. B - Total Memory

Answer: A

Explanation:
Explanation/Reference:

 

NEW QUESTION 41
Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

  • A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
  • B. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
  • C. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
  • D. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

Answer: C

 

NEW QUESTION 42
Which NX-OS command is used to display the boot variable configuration?

  • A. show config
  • B. open boot
  • C. display boot
  • D. show boot

Answer: D

 

NEW QUESTION 43
......

Authentic Best resources for 010-151 Online Practice Exam: https://www.dumptorrent.com/010-151-braindumps-torrent.html

Get the superior quality 010-151 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1xGO6Y_rwlS-fXkefPECdcSiL-kdPDyxC