[Sep-2021] Pass NCM-MCI5.15 Exam in First Attempt UpdatedNCM-MCI5.15 DumpTorrent Exam Question

Nutanix Certified Master Dumps NCM-MCI5.15 Exam for Full Questions - Exam Study Guide

NEW QUESTION 10
An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.
Which action should the administrator perform?

• A. Use storage live migration
• B. Use Cross Hypervisor DR to replicate VMs from ESXi to AHV
• C. Use Nutanix one-click cluster conversion from ESXi to AHV
• D. Use VMware Converter

Answer: C

Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/convert-existing-nutanix-vmware-cluster-to-nutanix-only-37600

 

NEW QUESTION 11
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
What action should be taken to reclaim the storage capacity?

• A. Shrink the Volume Group that is associated with the Linux VM
• B. Unmount the Volume Group and then Remount the Volume Group
• C. Run Defrag on the Linux VM
• D. Enable the unman operation on the Linux VM

Answer: B

Explanation:
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134

 

NEW QUESTION 12
An administrator needs to initiate a new VDI project within a couple of months. Prism Central reports there are no storage resources to accommodate such workloads.
The administrator sees many powered-off VMs and has the authority to delete test VMs powered off at least for 30 days. Test VMs belong to the Test category.
Using Prism Central, which steps are required to identify the correct VMs to be deleted?

• A. Create a new Project selecting Test VMs, sorting by power state
• B. Filter VMs list, choose Test category and Inactive under Efficiency
• C. Use Capacity Runway to filter by Test and Powered-off VMs
• D. Create a new Scenario selecting Test VMs. filter by uptime

Answer: B

Explanation:

 

NEW QUESTION 13
Over the period of 2 to 3 weeks, a cluster displays the following:
* Periods where Warning Alerts of memory usage over 75% are asserted
* Periods where Critical Warnings of memory usage over 90% are asserted
* Periods of slow of frozen VDI desktops have caused work stoppage or slowdown
* VDI clones have periodically not powered up when called, causing work stoppage Which steps should be used to prioritize the administrator's troubleshooting efforts?

• A. * Review Analysis Page for memory use pattern
  * Alert with VDI workload demand
  * Analyze current and future workload in the Capacity Runaway tab for sufficient resources
• B. * Analyze Alert Pages for a root cause of memory problem
  * Analyze VM table page to access the VM functionality
  * Analyze the VDI Clone properties for possible VDI Workload stress
• C. * Assess resource health on Hardware page
  * Review the Analysis page for memory usage demand
  * Determine the VDI workload-to-host affinity across the cluster
• D. * Check Analysis page for CPU demand
  * Verify VDI workload property for memory subscription
  * Review the Hardware page to determine if the cluster has sufficient RAM

Answer: A

 

NEW QUESTION 14
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?

• A. Soft
• B. External
• C. Internal
• D. Hard

Answer: A

Explanation:

 

NEW QUESTION 15
A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.
Which action should the administrator take to resolve the NCC errors?

• A. Add 2 additional 10G uplinks from the switch fabric extenders per node
• B. Upgrade NCC and increase the CVM memory by 4Gb
• C. Upgrade NCC and increase the vCPU of the CVM
• D. Replace the switch fabric extenders with 10G line rate switches

Answer: D

Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=System-Specs-G6-Single-Node:set-block-connect-c.html

 

NEW QUESTION 16
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?

• A. On hardware external to the Nutanix duster
• B. As a single VM deployed on the host that contains the Prism leader CVM
• C. As a clustered VM setup on the Nutanix cluster
• D. As a single VM on the Nutanix cluster

Answer: A

Explanation:

 

NEW QUESTION 17
Refer to the exhibit.

What is the purpose of eth2 on the CVMs?

• A. Remote site connectivity
• B. RDMA Network Segmentation
• C. Network Segmentation
• D. iSCSI connectivity

Answer: C

Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291

 

NEW QUESTION 18
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?

• A. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
• B. Expanse the cluster by adding 9 nodes to a new 42U rack
• C. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
• D. Expanse the cluster by adding 8 nodes to a new 42U rack

Answer: C

Explanation:

 

NEW QUESTION 19
An administrator is migrating 5MB shares from a third-party platform to Nutanix Files with the following characteristics:
* Shares contain user profile directories
* DFS-N will be used
How should the administrator create target shares for this migration?

• A. Create multiple distributed shares and distribute migrated data as evenly as possible.
• B. Create multiple general purpose shares and distribute migrated data as evenly as possible.
• C. Create distributed shares with multiple top-level directories and distribute migrated data.
• D. Create standard shares with multiple top-level directories and distribute migrated data.

Answer: C

Explanation:
Ref: https://portal.nutanix.com/page/documents/details/?targetId=Files-v3_6:Files-v3_6

 

NEW QUESTION 20
An administrator has an existing Nutanix seven-node cluster running at RF2 that must be changed to have the following capabilities:
* RF3 set for the cluster
* Performance tier deduplication
What is the minimum memory needed on the CVMs to allow for these capabilities?

• A. 28GB
• B. 24GB
• C. 32GB
• D. 20G?

Answer: A

Explanation:
Ref: https://next.nutanix.com/how-it-works-22/rf2-rf3-requirements-37206#:~:text=Controller%20VMs%20must%20be%20configured,for%20the%20feature)%20of%20memory.

 

NEW QUESTION 21
An organization is planning an upgrade to AOS 5.15 and wants to understand which cluster products and/or services are supported for physical traffic isolation.
Which Nutanix component supports its network traffic being isolated onto its own virtual network?

• A. Containers
• B. Volumes
• C. Files
• D. Objects

Answer: B

 

NEW QUESTION 22
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?

• A. Compression only
• B. Compression and Deduplication
• C. Compression, Deduplication, and Erasure Coding
• D. Deduplication and Erasure Coding

Answer: D

Explanation:
Ref:

 

NEW QUESTION 23
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)

• A. Reconfigure IPMI for the new datacenter
• B. Relocate the linked LDAP servers
• C. Stop all Nutanix Files clusters
• D. Shut down all user VMs in the cluster

Answer: C,D

Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/physical-relocation-of-nutanix-clusters-38403

 

NEW QUESTION 24
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?

• A. VMs get deleted from Site B. and the protection domain is now Active.
• B. VMs get deleted from Site A and the protection domain is no longer active.
• C. Customer must then manually power off VMs at Site A and power them on at Site B.
• D. VMs are powered off on Site A and must be manually powered on at Site B.

Answer: B

Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-domain-failback-disaster.html

 

NEW QUESTION 25
An administrator manages the following two Nutanix AOS 5.15 cluster environment:
* Corp-cluster-01
* Corp-cluster-02
The VM images must be available only on Corp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.
Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)

• A. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster
• B. Set the policy enforcement to Soft.
• C. Set the policy enforcement to Hard.
• D. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.

Answer: A,C

Explanation:
Ref: https://next.nutanix.com/community-blog-40/nutanix-just-made-ahv-image-management-painless-33144

 

NEW QUESTION 26
An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?

• A. The bandwidth must be increased to support this workload.
• B. The replication frequency must be less than 60 minutes.
• C. Zero data loss nearsync must be used to support this workload.
• D. The workload must be configured to read at greater than 12.5MB/S.

Answer: A

Explanation:
Ref:

 

NEW QUESTION 27
An administrator needs to forecast infrastructure requirements for a new program and its associated applications. Prior to the projected start of the new program, all existing applications will be decommissioned.
How should the administrator perform this task?

• A. Check the Disregard Existing Nodes radio button in the Runway scenario.
• B. Add up the recovered workloads and manually remove from the Runway configuration.
• C. Check the Disregard Existing Workloads radio button in the Runway scenario.
• D. Power down the workloads during a maintenance window and run the Capacity Runway.

Answer: C

 

NEW QUESTION 28
An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?

• A. Add one large SSD to each node and enable Flash Mode for the VMs.
• B. Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.
• C. Add one large virtual disk to each VM. and use it for all application data.
• D. Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.

Answer: B

Explanation:
Ref: https://next.nutanix.com/server-virtualization-27/iops-latency-issue-1168

 

NEW QUESTION 29
A three-node cluster has a Nutanix Files instance with three FSVMs.
What happens after a node failure?

• A. The affected FSVM will not be restarted on another node due to its VM-to-VM anti-affinity settings.
• B. The affected FSVM will get live-migrated to another node.
• C. The affected FSVM will be restarted on another node.
• D. The affected FSVM will not be restarted on another node due to its agent VM setting.

Answer: C

Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-files-high-availability-c.html

 

NEW QUESTION 30
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?

• A. Configure bond0 as balance-lacp
• B. Configure bond0 as balance-sib
• C. Configure bond0 as active-backup
• D. Configure bond0 as balance-tcp

Answer: B

Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_networking_best_practices.html

 

NEW QUESTION 31
Refer to the exhibit.

An administrator receive the warning massages shown in the exhibit while validating cluster conversion from EXSi to AHV.
What should the administrator do to address this warning in v Center Server?

• A. Remove the standby adapters under Teaming and Failover.
• B. Remove adapters that are active but not homogeneous.
• C. Keep active adapters od different speeds as active standby
• D. Keep homogeneous adapter as active and standby

Answer: D

 

NEW QUESTION 32
......

Authentic Best resources for NCM-MCI5.15 Online Practice Exam: https://www.dumptorrent.com/NCM-MCI5.15-braindumps-torrent.html