Updated Apr-2025 Test Engine to Practice 350-801 Test Questions

350-801 Real Exam Questions Test Engine Dumps Training With 390 Questions

NEW QUESTION # 188
An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

• A. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.
• B. Create a user profile in Jabber Policies.
• C. Deploy jabber-config-user.xml on iOS and Android devices.
• D. Upload the jabber-config.enc file to TFTP

Answer: A

NEW QUESTION # 189
What are two Cisco UCM location bandwidths that are deducted when G 729 and G.711 codecs are used? (Choose two.)

• A. If a call uses G.729. Cisco UCM subtracts 24k.
• B. If a call uses G.711, Cisco UCM subtracts 64k
• C. If a call uses G.729. Cisco UCM subtracts 40k
• D. If a call uses G.711, Cisco UCM subtracts 80k
• E. If a call uses G.729. Cisco UCM subtracts 16k.

Answer: A,D

NEW QUESTION # 190
What is the maximum one-way latency and jitter tor voice before quality issues arise?

• A. ≤ 100 ms Latency and ≤ 10 ms jitter
• B. ≤ 90 ms Latency and ≤ 30 ms jitter
• C. ≤ 300 ms Latency and ≤ 60 ms jitter
• D. ≤ 150 ms Latency and ≤ 30 ms jitter

Answer: D

NEW QUESTION # 191
After an engineer implements the FAC and CMC features together, users report that calls take almost one minute to complete and that they occasionally hear the reorder tone. Which two actions address this issue?( Choose two)

• A. Do not wait for the tones immediately dial the FAC and CMC
• B. Advise the user to hang up and try again
• C. Change the code if the problem persists
• D. Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
• E. Advise the user to press the"#"button after dialing the FAC and CMC codes

Answer: C,D

NEW QUESTION # 192
An administrator has been asked to implement toll fraud prevention in Cisco UCM Which tool is used to begin this process?

• A. Cisco Unified Real-Time Monitoring Tool
• B. Cisco UCM class of service
• C. Cisco Unified Mobility
• D. Cisco UCM Access Control Group restrictions

Answer: B

NEW QUESTION # 193
Which Cisco UCM configuration is required for SIP MWI integrations?

• A. Enable "Accept presence subscription" on the SIP Trunk Security Profile.
• B. Select "Redirecting Diversion Header Delivery - Outbound" on the SIP trunk.
• C. Select "Redirecting Diversion Header Delivery - Inbound" on the SIP trunk.
• D. Enable "Accept unsolicited notification" on the SIP Trunk Security Profile.

Answer: D

Explanation:
In case of SIP integration, CUC sends SIP notify messages to the phone system to turn the MWI on or OFF so "Accept unsolicited notification" should be checked under SIP security profile assigned to the trunk.
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-troubleshooting- mwi-on-unity-connection/ta-p/3162948

NEW QUESTION # 194
Which call flow matches traffic from a Mobile and Remote Access registered endpoint to central call control?

• A. Endpoint > Expressway-E > Cisco Unified CM
• B. Endpoint > Expressway-C > Cisco unified CM
• C. Endpoint > Expressway-E > Expressway-C > Cisco Unified CM
• D. Endpoint > Expressway-C > Expressway-E > Cisco Unified CM

Answer: C

NEW QUESTION # 195
Refer to the exhibit. A call to an international number has failed.
Which action corrects this problem?

• A. Add the bearer-cap speech command to the voice port.
• B. Strip the leading 011 from the called party number
• C. Add the isdn switch-type primart-dms100 command to the serial interface.
• D. Assign a transcoder to the MRGL of the gateway.

Answer: B

NEW QUESTION # 196
Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addressing mode be set up in the Cisco Unity Connection?

• A. Set up for each group to use IPv4 and IPv6.
• B. Set up media ports for each port group to use IPv4.
• C. Set up is not required.
• D. Set up IPv4 and IPv6 in cisco Unified CM.

Answer: A

Explanation:
For SIP integrations with Cisco Unified CM, if Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, you can configure the addressing mode that Unity Connection uses for call control signaling for each port group to use either IPv4 or IPv6. (This mode is also used when connecting to a TFTP server.) In addition, you can configure the addressing mode that Unity Connection uses for media for each port group to use either IPv4 or IPv6.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/design/guide/b_11xcucdg/ b_11xcucdg_chapter_00.html?bookSearch=true

NEW QUESTION # 197
Which capability is supported by Cisco Discovery Protocol but not by LLDP-MED?

• A. power discovery
• B. location identification discovery
• C. trust extension
• D. network policy discovery
• E. LAN speed and duplex discovery

Answer: C

Explanation:
Cisco Discovery Protocol provides an additional capability not found in LLDP-MED that allows the switch to extend trust to the phone. In this case, the phone is now trusted to mark the packets received on the PC port accordingly. This feature can be used to off-load the switch because now it does not need to police the information being received from the phone.

NEW QUESTION # 198
Drag and Drop Question
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behavior values on the right.

Answer:

Explanation:

Explanation:
QoS Baseline Model (11 Class)
Voice: Refers to voice only, and it is marked with EF and limited to 10 percent of link bandwidth in a strict-priority queue.
Interactive Video: Refers to voice and video, and it is marked with AF41 or sometimes as EF and limited to 13 percent of link bandwidth.
Call Signaling: Marked with CS3 and provisioned with a minimum of 2 percent of link bandwidth.
Network Management: Marked with CS2 and provisioned as guaranteed 2 percent of link bandwidth.
Bulk Data: Marked with AF11 and provisioned with 10 percent of link bandwidth with WRED enabled.
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS- SRND-Book/QoSIntro.html

NEW QUESTION # 199
Refer to the exhibit.

Endpoint A calls endpoint B. What is the only audio codec that can be used for the call?

• A. G7221/16000
• B. G277/8000
• C. Telephone-event/8000
• D. PCMA/8000

Answer: B

NEW QUESTION # 200
What are two features of Cisco Expressway that the customer gets if Expressway-C and Expressway-E are deployed?(Choose two.)

• A. complete endpoint registration and monitoring capabilities for devices that are local and remote.
• B. additional visibility of the edge traffic in an organization.
• C. utilization and adoption metrics of all remotely connected devices.
• D. highly secure freal-traversal technology to extend organizational reach.
• E. session-based access to comprehensive collaboration for remote workers, without the need for a separate VPN client.

Answer: D,E

NEW QUESTION # 201
What is a capability of the call forwarding feature in a Cisco Webex dial plan?

• A. business continuity
• B. Call Admission Control
• C. ringtone selection
• D. device pool selection

Answer: A

Explanation:
Call forwarding is a feature that allows users to forward incoming calls to another number. This can be useful in a number of situations, such as when a user is not available to take a call, or when a user wants to forward calls to a different number during certain times of the day.
Call forwarding can be used to improve business continuity by ensuring that calls are always answered, even if the user is not available. For example, if a user is out of the office, they can forward their calls to their voicemail or to another employee. This ensures that customers and clients can always reach someone, even if the user is not available.

NEW QUESTION # 202
Refer to the exhibit.

You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

• A. The DNS record type should be changed from SRV to A.
• B. The DNS record should be changed from _collab-edge._tls example.com.
• C. Server 4.2.2.2 is not a valid DNS server.
• D. The DNS record should be created for _ cisco-uds._tcp example.com.

Answer: B

NEW QUESTION # 203
An end user at a remote site is trying to initiate an Ad Hoc conference call to an end user at the main site. The conference bridge is configured to support G.711. The remote user's phone only supports G.729. The remote end user receives an error message on the phone: "Cannot Complete Conference Call." What is the cause of the issue?

• A. A software conference bridge is not assigned.
• B. The transcoder resource is missing.
• C. A Media Termination Point is missing.
• D. The remote phone does not have the conference feature assigned.

Answer: B

NEW QUESTION # 204
Refer to the exhibit.

Refer to the exhibit. An administrator must replace the T1 card with an E1 card. What is the correct configuration if the administrator was asked to configure 12 time slots?

• A.
• B.
• C.
• D.

Answer: D

NEW QUESTION # 205
According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

Answer:

Explanation:

NEW QUESTION # 206
A remote office has a less-than-optimal WAN connection and experiences packet loss, delay and jitter. Which VoIP codec is used in this situation?

• A. G.711alaw
• B. iLBC
• C. G.729A
• D. G722.1

Answer: B

Explanation:
iLBC: iLBC provides audio quality between that of G.711 and G.729 at bit rates of 15.2 kbps (38- bytes or 20msec) and 13.3 kbps (50 bytes or 30 msec). iLBC handles lossy networks in better way than G729 because it treats each packet independently. G729 depends on the previous packet to handle packet loss, jitter and delay which doesn't tolerate well in lossy networks.

NEW QUESTION # 207
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

• A. Pattern usage, IPv6 pattern, and SIP trunk/Route list
• B. SIP trunk/Route list, description, and IPv4 pattern
• C. Pattern usage, IPv4 pattern, and SIP trunk/Route list
• D. Pattern usage, IPv4 pattern, IPv6 pattern, and description

Answer: C

NEW QUESTION # 208
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.

Answer:

Explanation:

Explanation
Voice = EF
Interactive Video = AF41
Bulk Data = AF11
Call-Signaling = AF31/CS3
Network Management = CS2
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/Qo

NEW QUESTION # 209
User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)

Answer:

Explanation:
CD

NEW QUESTION # 210
Which statement about Cisco Unified Communications Manager and Cisco IM and Presence backups is true?

• A. Backups are saved as unencrypted .tar files.
• B. Backups are not needed for subscriber Cisco Unified Communications Manager and Cisco IM and Presence servers.
• C. Backups are saved as .tar files and encrypted using the web administrator account.
• D. Backups should be scheduled during off-peak hours to avoid system performance issues.

Answer: D

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1_SU1/Administration/ cucm_b_administration-guide-1151su1/cucm_b_administration-guide-
1151su1_chapter_01010.html#CUCM_TK_S7FC26D5_00

NEW QUESTION # 211
......

350-801 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.dumptorrent.com/350-801-braindumps-torrent.html

350-801 Exam questions and answers: https://drive.google.com/open?id=17Q50D3qo9eIQwGAj-1rwas57Le-BKN8g