Verified 71300X dumps Q&As - 2022 Latest 71300X Download

Dumps Questions [2022] Pass for 71300X Exam

NEW QUESTION 19
The WebRTC snap-in needs to be loaded on which of Avaya BreezeTM cluster?

• A. Core Platform EDP Cluster
• B. Context Store EDP Cluster
• C. General Purpose EDP Cluster
• D. Work Assignment EDP Cluster

Answer: A

Explanation:
Explanation
A cluster profile is a pre-loaded template that contains cluster attributes.
The Core Platform cluster profile: A closed cluster that supports up to 10 Avaya Breeze servers.

 

NEW QUESTION 20
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)

• A. adding new feature buttons to agent sets
• B. receiving notifications of events
• C. controlling specific calls or stations
• D. invoking CM features
• E. completing the routing of incoming calls
• F. performing a remote reboot to the CM server

Answer: B,C,D,E

Explanation:
Explanation
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura Application Enablement Services TSAPI for Avaya Communication Manager Programmer's Reference Release 6.1, page 128
https://downloads.avaya.com/css/P8/documents/100141354

 

NEW QUESTION 21
For an Avaya SIP telephone, working as a Remote Worker via the Avaya Session Border Controller for Enterprise (SBCE), which IP address should be configured in the Server List of the one-X Communicator?

• A. the Avaya Aura Session Manager External Interface allocated for Mobile Workspace Endpoints.
• B. the Internal Avaya Aura Session Manager SM100 IP Address
• C. the SBCE Internal Interface allocated for Mobile Workspace Endpoint
• D. the SBCE External Interface allocated for Mobile Workspace Endpoint

Answer: A

Explanation:
Explanation
Remote Worker Avaya one-X Communicator Configuration
The following screens illustrate Avaya one-X Communicator administration settings for the Remote Worker used in the reference configuration.
Example:
1. On the Avaya one-X Communicator application running on the PC, click on the Settings icon on the top right to display the Settings window.2. Click on Telephony, the General Settings window will appear. The following values were used in the reference configuration:
Under Using: select SIP (SIP must be selected; H.323 is not supported for Remote Workers).
* Under Server List, click Add (the Add Server window to the right will appear).
* Under Proxy Server enter 192.168.157.180 (This is one of the two "public" IP addresses for interface B1 on the Avaya SBCE used for Remote Worker access to Session Manager (public IP not used for relay services).
Etc.
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 81
https://downloads.avaya.com/css/P8/documents/100183254

 

NEW QUESTION 22
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, which two configuration screens must be configured for Personal Profile Management (PPM) to be successfully downloaded to an Avaya SIP Telephone (AST)? (Choose two.)

• A. Reverse Proxy
• B. PPM Services Mapping Profile
• C. File Transfer
• D. Application Relay

Answer: B,D

Explanation:
Explanation
B: Application relays function as port forwards. Different clients require different application relays.
A: An Avaya SIP phone downloads and processes a configuration file, sends out a slew of SUBSCRIBE messages, and uses something called Personal Profile Manager (PPM).
Note: The PPM is a software module that runs as part of an Avaya Session Manager. It consists of a series of web services that phones use to retrieve and manage SIP related user data.
References:
https://andrewjprokop.wordpress.com/2014/03/28/understanding-avayas-personal-profile-manager-ppm/
https://downloads.avaya.com/css/P8/documents/101028355

 

NEW QUESTION 23
Which three statements about Avaya BreezeTM are true? (Choose three.)

• A. It does not require a license.
• B. It is used by Avaya, Partner, and Enterprise Developers.
• C. It allows application developers to quickly add new capabilities to their Avaya solutions.
• D. It was formerly called Collaboration POD but has been renamed to Avaya BreezeTM.
• E. It is a development platform that enables rapid development for applications that are targeted to meet a customer's communications needs.

Answer: B,C,E

Explanation:
Explanation
Avaya Breeze provides a virtualized and secure application platform where Java programmers can develop and dynamically deploy advanced collaboration capabilities that extend the power of Avaya Aura.
Customers, partners, and Avaya organizations can rapidly develop snap-ins and applications that are deployed on Avaya Breeze.

 

NEW QUESTION 24
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?

• A. a minimum of two Subscriber Flows
• B. one Subscriber Flow and one Server Flow
• C. one Subscriber Flow and two Server Flows
• D. a minimum of two Server Flows

Answer: C

Explanation:
Explanation
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:

References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
540, 546

 

NEW QUESTION 25
The Avaya WebRTC solution uses the web intensively to make media calls from a standard web browser in the internet, into internal and secure communication premises in the enterprise.
Which statement about security between the Enterprise-edge and those standard Web browsers in the internet is true?

• A. WebRTC only works within the Enterprise network. External Web Browsers must connect through an Avaya Session Border Controller for Enterprise (SBCE) via a SIP trunk.
• B. A trust relationship based on certificates must be built to make WebRTC work.
• C. No trust relationship exists between enterprise edge security and web browsers; therefore, the security strategy is based on an Authorization Token instead.
• D. There must be a VPN connection between the Web Browser and the Enterprise-edge to build a WebRTC link.

Answer: C

Explanation:
Explanation
Validation of the authorization token.
The WebRTC Snap-in will validate the authorization token created and encrypted by the web server. If the snap-in can decrypt the token and ensure that the time stamp is valid, it knows that the incoming HTTP request is valid. The time stamp will usually be short lived; on the order of 5-10seconds to protect against reply attacks.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 27
https://downloads.avaya.com/css/P8/documents/101013939

 

NEW QUESTION 26
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?

• A. Verify that Avaya BreezeTM is licensed.
• B. Verify that an enrollment password is configured on System Manager and that it has not expired.
• C. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
• D. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.

Answer: B

Explanation:
Explanation
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2-15 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
b. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page 223
https://downloads.avaya.com/css/P8/documents/101013646

 

NEW QUESTION 27
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.
What would you do first to resolve the issue?

• A. Reboot SBCE.
• B. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
• C. Restart Applications.
• D. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.

Answer: D

Explanation:
Explanation
The interface might need to be enabled.

2. Click on the Interface Configuration tab.

3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
204

 

NEW QUESTION 28
You want to multiplex all remote workers SIP messages to Avaya Aura Session Manager (SM) over the same TCP connection, rather than open a dedicated TCP connection for each user.
Which feature needs to be enabled for Avaya Session Border Controller for Enterprise (SBCE)?

• A. the Share Transport Link feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile
• B. the Stream Users Over Transport Link feature in the Signaling Interface
• C. the Enable Shared Control feature in the Signaling Interface.
• D. the Enable Grooming feature in the Advanced tab of the Avaya Aura Session Manager (SM) Server Profile

Answer: D

Explanation:
Explanation
Example:

References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 36
https://downloads.avaya.com/css/P8/documents/100183254

 

NEW QUESTION 29
Which statement describes Cross-Origin Resource Sharing (CORS)?

• A. It allows for signaling-groups to be used by more than one trunk-group.
• B. It is making DSP resources available regardless of the originating location of a call.
• C. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
• D. It is a W3C specification that allows cross-domain communication from the browser.

Answer: D

Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing

 

NEW QUESTION 30
Avaya Aura Presence Services 7.x is implemented on Avaya BreezeTM (formerly known as Engagement Development Platform (EDP)).
When looking at Elements > Engagement Development Platform > Service Management, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?

• A. Loaded
• B. Accepting
• C. Active
• D. Installed

Answer: B

Explanation:
Explanation
Enabling Avaya Breeze cluster running Presence Services
Before you begin
Ensure that the Avaya BreezeTM servers running the Presence Services are recovered / powered up.
Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze > Cluster Administration.
2. Select the Presence Services cluster, and change the Cluster State to Accept New Service.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 48
https://downloads.avaya.com/css/P8/documents/101013646

 

NEW QUESTION 31
To log on the one-X Communicator to Avaya Aura Presence Services server, what do you enter in the IM and Presence / Server field of the one-X Communicator?

• A. the SM100 IP-Address or FQDN of Avaya BreezeTM server
• B. the SM100 IP-Address of FQDN of Avaya Aura Session Manager (SM)
• C. the management IP-Address of FQDN of Avaya BreezeTM server
• D. the management IP-Address of FQDN of Avaya Aura Session Manager (SM)

Answer: B

Explanation:
Explanation
The SIP one-X Communicator needs to be configured to use a specific protocol and port when registering to Session Manager.Enter the IP address of the Session Manager virtual SM-100 card for Session Manager SIP Element.
References: Application Notes for Configuring Avaya AuraTM Presence
Services 6.0 with Avaya AuraTM Session Manager 6.0, and Avaya AuraTM Communication Manager for one-XTM Communicator clients as part of Avaya Unified Communication Mobile Worker Solution - Issue
1.0, page 30
https://www.devconnectprogram.com/fileMedia/download/dba93412-03c6-4fda-8d6a-280ae2193d6f

 

NEW QUESTION 32
When planning the Avaya Session Border Controller for Enterprise (SBCE) for SIP Trunking, what is a good practice to adopt?

• A. Use the same IP address on both, internal and external sides of the network.
• B. Name all internal and external interfaces exactly the same.
• C. Name Interfaces consistently, for example, A1 for Internal network to Call Server and B1 for external to Trunk Server.
• D. Use one Avaya Session Border Controller for Enterprise on the internal and external sides of the network.

Answer: C

Explanation:
Explanation
Use the same interface mapping throughout! Examples in this section use:

References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
304

 

NEW QUESTION 33
In Avaya Aura Messaging (AAM) 6.3, how many Call Answering Ports can one Application Server support?

• A. up to 10 Ports
• B. up to 1000 Ports
• C. up to 10000 Ports
• D. up to 100 Ports

Answer: D

Explanation:
Explanation
The Call Answer Ports range is 2-100.
References: Administering Avaya Aura Messaging, page 34
https://downloads.avaya.com/css/P8/documents/100112131

 

NEW QUESTION 34
In Avaya Aura System Manager, how is Avaya Aura Messaging (AAM) added to the list of Managed Elements?

• A. It is automatically added during the enrollment process.
• B. It can only be manually added.
• C. It is added when you configure the AAM SIP Entity in SMGR.
• D. It is automatically added using initTM -f command on the Command Line Interface of AAM.

Answer: D

Explanation:
Explanation
In System Manager, element installation sets up the trust between System Manager and its managed elements.
. Similarly, UCM has a trust management process to set up the trust between UCM and its managed elements.
To enable managed elements of UCM to be in the same trust domain as the System Manager managed elements, you must import the UCM Certificate Authority (CA) certificate to the System Manager managed element's trusted certificate list.
Note: To force a re-initialization of trust management
1. Ensure the enrollment password in the System Manager Security -> Enrollment Password screen is valid and set. Make note of this password as it will be needed when running the trust management initialization command.
2. Log into the Session Manager virtual machine IP address with an ssh client as the craft or customer account login
3. Execute the following shell command once at the shell prompt:
$ initTM -f
This will prompt you for the enrollment password and then initialize trust management and the database replication service of the Session Manager.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3, Issue 8, November 2016, page 1073
https://downloads.avaya.com/css/P8/documents/101008185
https://downloads.avaya.com/css/P8/documents/100161692

 

NEW QUESTION 35
In Avaya Aura Messaging 6.3, which statement is true about Avaya Aura Messaging (AAM) capacities of a system utilizing the Standard Capacity (non-High Capacity) Message Store template?

• A. One Message Store Server supports up to 600 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.
• B. One Message Store Server supports up to 1000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.
• C. One Message Store Server supports up to 60000 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.
• D. One Message Store Server supports up to 6000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.

Answer: D

Explanation:
Explanation
Dedicated AxC/Directory server: A physical server that manages notification capabilities and the LDAP database and provides communications between application servers and the thirdparty storage server. This server also stores user properties and name and greeting recordings.
Not all configurations require a dedicated AxC/Directory server because the AxC/Directory role runs on the Avaya-provided message store. You only need a dedicated AxC/Directory server for:
References: Avaya Aura Messaging Overview and Specification, Release 6.3.2 (January 2015) , page 20
https://downloads.avaya.com/css/P8/documents/101004642

 

NEW QUESTION 36
In Avaya Session Border Controller for Enterprise (SBCE) 7.x, you need to download the 46xxsettings.txt file to a Remote Worker device.
What needs to be configured under DMZ Services > Relay Services?

• A. Application Relay and Reverse Proxy
• B. Reverse Proxy
• C. Application Relay and File Transfer
• D. Application Relay

Answer: D

Explanation:
Explanation
Relay Services are used to define how file transfers (e.g., for phone firmware upgrades and configuration), are routed to the Remote Worker endpoints.
Example: 2 For accessing the file server using HTTPS protocol
The following screenshot shows the newly created Relay Services

References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 73
https://downloads.avaya.com/css/P8/documents/100183254

 

NEW QUESTION 37
You need to connect Avaya BreezeTM platform that is hosting Avaya Aura Presence Services Snap-in with Avaya Aura Session Manager (SM).
Which three are needed? (Choose three.)

• A. one Entity Link from SM to Avaya BreezeTM
• B. ports TCP 5060 and UDP 5060
• C. one Entity Link from SM to Avaya Aura Presence Services Snap-in
• D. TLS 5061 and TLS 5062
• E. ports UDP 5060 and TLS 5061

Answer: A,C,D

Explanation:
Explanation
BD: Administering Entity Link between Presence Services Cluster SIP Entity and Session Manager Procedure
1. On the System Manager web console, navigate to Elements > Routing > Entity Links.
2. In the Name field, enter a name for Entity Link.
3. In the SIP Entity 1 field, select the Session Manager instance.
4. In the Protocol field, select TLS.
5. In the Port field, type 5062.
Note: Note that this port number cannot be the same as the port number administered in
"Administering Entity Link between Avaya Breeze and Session Manager".
CD: Administering Entity Link between Avaya Breeze and Session Manager.
About this task
Create an En2tity Link to connect Session Manager to Avaya Breeze. You must administer separate Entity Links for Avaya Breeze servers in order to open SIP listeners on the designated ports.
Session Manager requires a Listen Port with the Listen Port as 5061, Protocol as TLS, and Default Domain as the login domain of endpoint devices. Without this, PPM will fail for SIP endpoints.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), pages 25-26
https://downloads.avaya.com/css/P8/documents/101013646

 

NEW QUESTION 38
If more than one Avaya BreezeTM node is available in the cluster, which statement about redundancy and load-balancing is true?

• A. The list of all Avaya BreezeTM nodes SM100 IP addresses must be configured in the client.
• B. The Cluster IP address is not used for Presence Services in 7.0. IM clients configure a FQDN instead of IP address which is resolved by a DNS server to all Avaya BreezeTM nodes in the cluster.
• C. IM clients point to any Avaya BreezeTM node SM100 IP address. The client is dynamically informed of alternate Avaya BreezeTM nodes in the cluster.
• D. IM clients point to the Leader Avaya BreezeTM node SM100 IP address which redirects the clients to a particular Avaya BreezeTM node based on load-balancing policy.

Answer: D

Explanation:
Explanation
Enable load balancing for a cluster if you want to scale the HTTP services without targeting a particular Avaya BreezeTM server. All the requests are sent to the cluster IP address. When you enable load balancing, two Avaya BreezeTM servers are chosen as the active and standby load balancing servers. The active load balancer distributes the HTTP requests to all the other servers in the cluster in a round robin fashion.
References: Administering Avaya Breeze, Release 3.1 (May 2016), page 16
https://downloads.avaya.com/css/P8/documents/101014143

 

NEW QUESTION 39
To set Timers, URI Manipulation, and Header Manipulation that the Avaya Session Border Controller for Enterprise (SBCE) will use when signaling to the far-end server; a profile like "avaya-ru" is provided by default.
When configuring the Server Configuration, you must link to which type of Global profile?

• A. Signaling
• B. Routing
• C. Topology Hiding
• D. Server Interworking

Answer: D

Explanation:
Explanation
The standard Avaya profile "avaya-ru" is cloned for the Call Server Interworking Profile.
The Interworking function of the Global Profiles feature enables the SBCE to function in an enterprise VoIP network using different SIP protocols.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
339

 

NEW QUESTION 40
In which two locations is the Switch Password configured?

• A. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
• B. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
• C. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
• D. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)

Answer: A

Explanation:
Explanation
Enabling AE Services refers to administering the transport link between Communication Manager and AE Services.
Procedure
1. Type change ip-services. Communication Manager displays the IP SERVICES form
2. Complete Page 1 of the IP SERVICES form
3. Complete Page 3 of the IP SERVICES form as follows.
a. In the AE Services Server field, type the name of the AE Services server b. In the Password field, create a password.
This is the password that the AE Services administrator must set on the AE Server (Communication Manager Interface > Switch Connections > Edit Connection > Switch Password). The passwords must exactly match on both Communication Manager and the AE Services server.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, Release
6.3 (June 2014) , page 26
https://downloads.avaya.com/css/P8/documents/100171737

 

NEW QUESTION 41
......

Updated Avaya Study Guide 71300X Dumps Questions: https://www.dumptorrent.com/71300X-braindumps-torrent.html