Guaranteed Accomplishment with Newest Jan-2022 FREE Nutanix NCS-Core

Use Valid New Free NCS-Core Exam Dumps & Answers

NEW QUESTION 92
An administrator receives reports about a Nutanix environment. The investigation finds the following;
* VMs are experiencing very high latency
* Each node is equipped with a single SSD, utilized at 95%
* Each node is equipped with three HDDs, utilized at 40%
Why are the guest VMs experiencing high latency?

• A. VMs are unable to perform write operations.
• B. All VM write operations are going to HDD.
• C. CVMs are overwhelmed by disk balancing operations.
• D. All VM read operations are coming from HDD.

Answer: D

Explanation:
Explanation
Ref:https://next.nutanix.com/prism-infrastructure-management-26/disk-space-usage-high-alert-in-prism-38199

 

NEW QUESTION 93
A consultant is running the Foundation VM using desktop virtualization software. No nodes are discovered.
What should the consultant verify first?

• A. Host-only Adapter
• B. Bridged Adapter
• C. NAT
• D. Internal Network

Answer: B

 

NEW QUESTION 94
Refer to the exhibit.

A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?

• A. Link Aggregation
• B. Range Autofill
• C. Network Segmentation
• D. Multi-homing

Answer: D

 

NEW QUESTION 95
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)

• A. 192.168.5.254
• B. 192.168.5.253
• C. 192.168.5.2
• D. 192.168.5.1

Answer: A,C

 

NEW QUESTION 96
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?

• A. Through <cluster-IP> :8000
• B. Through <CVM-IP> :8000
• C. Through <cluster-IP> :9443
• D. Through <CVM-IP> :9443

Answer: B

 

NEW QUESTION 97
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected
5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?

• A. Change the protection domain to use Async DR
• B. Configure the protection domain to take snapshots on15-minute intervals
• C. Fix a connectivity issue because the protection domain reverted to Async
• D. Utilize Metro Availability to meet this requirement

Answer: C

 

NEW QUESTION 98
A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8.
The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?

• A. Upgrade the cluster to 5.9 and add the node through Prism Element.
• B. Use Prism Element to Expand the cluster and select the re-image option.
• C. Use Prism Element, which will downgrade the node by default during the node add process.
• D. Use the CLI and enter cluster add-node node-serial="node_serial".

Answer: B

 

NEW QUESTION 99
Which subnet is reserved for internal connectivity within a Nutanix Cluster?

• A. 192.168.5.0/26
• B. 192.168.5.0/23
• C. 192.168.5.0/24
• D. 192.168.254.0/24

Answer: C

 

NEW QUESTION 100
An organization is planning an upgrade to AOS 5.15 and wants to understand which cluster products and/or services are supported for physical traffic isolation.
Which Nutanix component supports its network traffic being isolated onto its own virtual network?

• A. Files
• B. Objects
• C. Volumes
• D. Containers

Answer: C

 

NEW QUESTION 101
An administrator needs to initiate a new VDI project within a couple of months. Prism Central reports there are no storage resources to accommodate such workloads.
The administrator sees many powered-off VMs and has the authority to delete test VMs powered off at least for 30 days. Test VMs belong to the Test category.
Using Prism Central, which steps are required to identify the correct VMs tobe deleted?

• A. Use Capacity Runway to filter by Test and Powered-off VMs
• B. Create a new Scenario selecting Test VMs. filter by uptime
• C. Create a new Project selecting Test VMs,sorting by power state
• D. Filter VMs list, choose Test category and Inactive under Efficiency

Answer: D

Explanation:

 

NEW QUESTION 102
A customer recently set up Async Replication between Site A and Site B.
The customer wants to conduct aplanned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?

• A. Customer must then manually power off VMs at Site A and power them on at Site B.
• B. VMs are powered off on Site A and must be manually powered on at Site B.
• C. VMs get deleted from Site B. and the protection domain is now Active.
• D. VMs get deleted from Site A and the protection domain is no longer active.

Answer: D

Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-do

 

NEW QUESTION 103
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?

• A. On hardware external to the Nutanix duster
• B. As a single VM on the Nutanix cluster
• C. As a clustered VM setup on the Nutanix cluster
• D. As a single VM deployed on the host that contains the Prism leader CVM

Answer: A

Explanation:

 

NEW QUESTION 104
An administrator iscurrently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.
Which two command should be used to configure the bond? (choose two)

• A. Ovs-vsctl set port br0-up bond_mode=balance-tcp
• B. Ovs-vsctl set port br0-up bond_mode=active-backup
• C. Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000
• D. Ovs-vsctl set port br0-up bond_mode=balance-slb

Answer: C,D

 

NEW QUESTION 105
Anadministrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in thevolume group have gone offline.
What is causing this issue?

• A. A CVM serving the Volume Group has gone offline.
• B. The Volume Group Load Balancer has been disabled.
• C. Port 9443 is blocked in the server firewall.
• D. Port 3260 has been blocked in the server firewall.

Answer: A

 

NEW QUESTION 106
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?

• A. genesis.out
• B. service.log
• C. first_boot.log
• D. foundation.out

Answer: B

 

NEW QUESTION 107
......

NCS-Core Braindumps PDF, Nutanix NCS-Core Exam Cram: https://www.dumptorrent.com/NCS-Core-braindumps-torrent.html

New 2022 NCS-Core Sample Questions Reliable NCS-Core Test Engine: https://drive.google.com/open?id=1OjULfPf9_ZLjePzosG5Yeg1ZAa6B1TT0