Latest JN0-635 Study Guides 2022 - With Test Engine PDF
Get New JN0-635 Practice Test Questions Answers
NEW QUESTION 10
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)
- A. This feature is supported on both branch and high-end SRX Series devices.
- B. This feature does not capture transit traffic.
- C. This feature captures ICMP traffic to and from the SRX Series device.
- D. This feature is supported on high-end SRX Series devices only.
Answer: A,B
Explanation:
Reference:
https://forums.juniper.net/t5/Ethernet-Switching/monitor-traffic-interface/td-p/462528
NEW QUESTION 11
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Events based on this third-party feed will not affect a host's threat score
- B. SRX Series devices will not block traffic based on this third-party feed
- C. Events based on this third-party feed will affect a host's threat score
- D. SRX Series devices will block traffic based on this third-party feed
Answer: A,D
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/sky-atp/topics/concept/sky- atp-integrated-feeds.html
NEW QUESTION 12
Click the Exhibit button.
Branch 1 and Branch 2 have an active VPN tunnel configured, but internal hosts cannot communicate with each other.
Referring to the exhibit, which type of configuration should be applied to solve the problem?
- A. Configure destination NAT on both Branch 1 and Branch 2
- B. Configure static NAT on both Branch 1 and Branch 2
- C. Configure destination NAT on Branch 2 only
- D. Configure source NAT on Branch 1
Answer: B
NEW QUESTION 13
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION 14
Which two modes are supported on Juniper Sky ATP? (Choose two.)
- A. secure wire mode
- B. global mode
- C. tap mode
- D. private mode
Answer: A,C
NEW QUESTION 15
Click the Exhibit button.
Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
https://www.juniper.net/documentation/us/en/software/junos/logical-system-security/topics/topic-map/security-z The primary administrator can configure a security profile for the primary logical system that specifies the maximum and reserved numbers of security zones applied to the primary logical system. The number of zones configured in the primary logical system count toward the maximum number of zones available on the device.
NEW QUESTION 16
Click the Exhibit button.
Given the command output shown in the exhibit, which two statements are true? (Choose two.)
- A. The host 10.10.101.10 is directly connected to interface ge-0/0/4.0
- B. The host 172.31.15.1 is directly connected to interface ge-0/0/3.0
- C. Traffic matching this session has been received since the session was established
- D. Network Address Translation is applied to this session
Answer: A,C
NEW QUESTION 17
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of three interfaces.
- C. The collector must have a minimum of two interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: A
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/task/configuration/jatp-traffic-collectorsetting-ssh-honeypot-detection.html
NEW QUESTION 18
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
NEW QUESTION 19
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an input filter on interface xe-0/2/1.0
- B. Create a routing instance named default
- C. Apply the filter as an input filter on interface xe-0/0/1.0
- D. Apply the filter as an output filter on interface xe-0/1/0.0
Answer: C
NEW QUESTION 20
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The rule set uses application definitions from the predefined library.
- B. The configured rule set matches most analyzed applications.
- C. There are two rules configured in the rule set.
- D. The application firewall rule is not inspecting encrypted traffic.
Answer: A,D
NEW QUESTION 21
Which two log format types are supported by the JATP appliance? (Choose two.)
- A. XML
- B. YANG
- C. YAML
- D. CSV
Answer: A,D
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/topic-map/jatp-custom-log-ingest
NEW QUESTION 22
Click the Exhibit button.
[edit security]
user@host# show policies
global {
policy new-policy {
match {
source-address any;
destination-address any;
application junos-https;
}
then {
permit {
application-services {
application-firewall {
rule-set appfw;
}
}
}
}
}
}
[edit security]
user@host# show application-firewall
rule-sets appfw {
rule 1 {
match {
dynamic-application junos:SSL;
}
then {
permit;
}
}
rule 2 {
match {
dynamic-application junos:HTTP;
}
then {
reject;
}
}
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. HTTP traffic is permitted.
- B. HTTPS traffic is dropped.
- C. HTTP traffic is dropped.
- D. HTTPS traffic is permitted.
Answer: C,D
NEW QUESTION 23
You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?
- A. You must wait 48 hours for the feed to update
- B. You have reached the maximum limit of 29 total feeds
- C. You cannot add more than 16 feeds with the available open API
- D. You cannot add more than 16 feeds through the available open API
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/sky-atp/information- products/pathway-pages/sky-atp-admin-guide.pdf page 110
NEW QUESTION 24
You are asked to set up notifications if one of your collector traffic feeds drops below 100 kbps.
Which two configuration parameters must be set to accomplish this task? (Choose two.)
- A. Set a traffic system alert on the JATP appliance
- B. Set a logging notification on the JATP appliance
- C. Set a general triggered notification on the JATP appliance
- D. Set a traffic SNMP trap on the JATP appliance
Answer: A,B
NEW QUESTION 25
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The device can pass Layer 2 and Layer 3 traffic at the same time
- B. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- C. You can secure inter-VLAN traffic with a security policy on this device
- D. You can secure intra-VLAN traffic with a security policy on this device
Answer: B,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ethernet-port-switching- modes.html
NEW QUESTION 26
......
JN0-635 Dumps and Exam Test Engine: https://www.dumptorrent.com/JN0-635-braindumps-torrent.html
Juniper JN0-635 DUMPS WITH REAL EXAM QUESTIONS: https://drive.google.com/open?id=16NX09hCrYJjgD1m5l9P5hNrZf5enh-s8