[Oct 17, 2024] New Updated 300-410 Exam Questions 2024
Updated Free Cisco 300-410 Test Engine Questions with 575 Q&As
Cisco 300-410 certification exam is designed to test an individual's knowledge and skills in implementing advanced routing technologies and services in an enterprise network. Implementing Cisco Enterprise Advanced Routing and Services certification is intended for network professionals who have experience in implementing and managing Cisco Enterprise network solutions. 300-410 exam covers topics such as routing protocols, VPN technologies, QoS, and network security.
Cisco 300-410 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Test Details
Before commencing your preparation, the learners should first get the right information about the official test, including its content, objectives, and structure. The exam itself is 90 minutes long and costs $300 on Pearson VUE. You can take it in either Japanese or English. There will be about 60 questions of various types. They include multiple choices with a single answer, multiple-choice with multiple answers, drag and drop, as well as fill-in-the-blank. Overall, it is a difficult test, but detailed and wise preparation will turn the tables. Generally, there are a few training options available for you that you can choose from. If you think that you need to go deeper into studying each topic, then you should complete the official instructor-led course or you can opt for in-class or online training. Alternatively, you can just do self-study and use exam dumps as well. After you are done with the courses and have covered all the relevant preparation materials, you should take some practice tests to gauge your knowledge level.
NEW QUESTION # 338
What are two MPLS label characteristics? (Choose two.)
- A. Labels are imposed in packets after the Layer 3 header.
- B. An MPLS label is a short identifier that identifies a forwarding equivalence class.
- C. LDP uses TCP for reliable delivery of information.
- D. The label edge router swaps labels on the received packets.
- E. A maximum of two labels can be imposed on an MPLS packet.
Answer: B,C
NEW QUESTION # 339
Refer to the exhibit.
An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?
- A. Only classful networks are redistributed from OSPF to BGP
- B. BGP convergence is slow, so the route will eventually be present in the BGP table
- C. By default, only internal OSPF routes are redistributed into BGP
- D. By default, only internal routes and external type 1 routes are redistributed into BGP
Answer: C
Explanation:
If you configure the redistribution of OSPF into BGP without keywords, only OSPF intra-area and inter-area routes are redistributed into BGP, by default.
You can redistribute both internal and external (type-1 & type-2) OSPF routes via this command: -Router(config-router)#redistribute ospf 1 match internal external 1 external 2 Reference:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/5242-bgp-ospf-redis.html
NEW QUESTION # 340
Refer to the exhibit.
A network administrator configured name resolution for IPv6 traffic to be allowed through an inbound access list. After the access list is applied to resolve the issue, name resolution still did not work. Which action does the network administrator take to resolve the name resolution problem?
- A. Add permit udp any eq domain any log in the access list.
- B. Add permit any eq domain 53 any log in the access list.
- C. inspect ipv6 inspect name ipv6-firewall udp 53 in global config.
- D. Remove ipv6 inspect ipv6-firewall in from interface gi0/1
Answer: D
NEW QUESTION # 341
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?
- A. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 traffic-filter Deny_Telnet in
! - B. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
6 / 39
Ipv6 traffic-filter Deny_Telnet in
! - C. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 eq telnet
! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - D. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host
201A:0:205C::1/64 ! int Gi0/0
Ipv6 access-map Deny_Telnet in
!
Answer: B
NEW QUESTION # 342
Refer to the exhibit.
A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and continues to block 10.1.1.100/32?
- A. ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
- B. route-map FILTER-IN permit 20
- C. ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32
- D. route-map FILTER-IN deny 5
Answer: B
Explanation:
Explanation
By using "deny" keyword in a route-map, we can filter out the prefix specified in the prefix-list.
But there is an implicit "deny all" statement in the prefix-list so we must permit other prefixes with "permit" keyword in the route-map.
NEW QUESTION # 343
Refer to the exhibit.
An engineer configuration a static route on a router, but when the engineer checks the route to the destination, a different next kop is chosen.
What is the reason for this?
- A. The configured AD for the static route is higher than the AD o OSPF.
- B. The syntax of the static route is not valid do the route is not considered.
- C. Dynamic routing protocol always have priority over static routes.
- D. The metric of the OSPF route is lower than the metric of the static route.
Answer: A
NEW QUESTION # 344 
Refer to the exhibit. During troubleshooting it was discovered that the device is not reachable using a secure web browser.
What is needed to fix the problem?
- A. permit tcp port 443
- B. permit tcp port 22
- C. permit udp port 465
- D. permit tcp port 465
Answer: A
Explanation:
Section: Infrastructure Security
NEW QUESTION # 345
Refer to the exhibit.
A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
- A. The route map is applied in the wrong direction.
- B. The local preference value should be set to the same value as the weight in the route map.
- C. The local preference value in another neighbor statement is higher than 250.
- D. The weight value in another neighbor statement is higher than 200.
Answer: A
NEW QUESTION # 346 
Refer to the exhibit. Users on a call center report that they cannot browse the internet on Saturdays during the afternoon. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 347
Which statement about route distinguishers in an MPLS network is true?
- A. Route distinguishers make a unique VPNv4 address across the MPLS network.
- B. Route distinguishers define which prefixes are imported and exported on the edge router.
- C. Route distinguishers are used for label bindings.
- D. Route distinguishers allow multiple instances of a routing table to coexist within the edge router.
Answer: A
Explanation:
Section: VPN Technologies
Explanation/Reference:
NEW QUESTION # 348
statement about route distinguishes in an MPLS network is true?
- A. Route distinguishes are used for label bindings
- B. Route distinguishers allow multiple instances of a routing table to coexist within the edge router.
- C. Route distinguishes make a unique VPNv4 address across the MPLS network.
- D. Route distinguishes define which prefixes are imported and exported on the edge router
Answer: B
NEW QUESTION # 349
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network devices such as routers and switches must be able to distinguish between data plane, control plane, and management plane packets to treat each packet appropriately.From an IP traffic plane perspective, packets may be divided into four distinct, logical groups:1. Data plane packets - End-station, user-generated packets that are always forwarded by network devices to other end-station devices. From the perspective of the network device, data plane packets always have a transit destination IP address and can be handled by normal, destination IP address-based forwarding processes.2. Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself. From the perspective of the network device, control plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as ARP, BGP, OSPF, and other protocols that glue the network together.3. Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage the network. From the perspective of the network device, management plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as Telnet, Secure Shell (SSH), TFTP, SNMP, FTP, NTP, and other protocols used to manage the device and/or network.4. Services plane packets - A special case of data plane packets, services plane packets are also user-generated packets that are also forwarded by network devices to other end-station devices, but that require high-touch handling by the network device (above and beyond normal, destination IP address-based forwarding) to forward the packet. Examples of high-touch handling include such functions as GRE encapsulation, QoS, MPLS VPNs, and SSL/IPsec encryption/decryption, etc. From the perspective of the network device, services plane packets may have a transit destination IP address, or may have a receive destination IP address (for example, in the case of a VPN tunnel endpoint).
NEW QUESTION # 350
Refer to the exhibit.
A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?
- A. Configure to match the OSPF interface unique IP address and subnet mask on both routers.
- B. Configure to match the OSPF interface MTU settings on both routers.
- C. Configure to match the OSPF interface speed and duplex settings on both routers.
- D. Configure to match the OSPF interface network types on both routers.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13684-12.html After two OSPF neighboring routers establish bi-directional communication and complete DR/BDR election (on multi-access networks), the routers transition to the exstart state. In this state, the neighboring routers establish a master/slave relationship and determine the initial database descriptor (DBD) sequence number to use while exchanging DBD packets.
Neighbors Stuck in Exstart/Exchange State The problem occurs most frequently when attempting to run OSPF between a Cisco router and another vendor's router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces don't match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighboring router ignores the packet.
NEW QUESTION # 351
An engineer must configure a Cisco router to initiate secure connections from the router to other devices in the network but kept failing. Which two actions resolve the issue? (Choose two.)
- A. Configure a crypto key to be generated
- B. Configure a source port for the SSH connection to initiate
- C. Configure a TACACS+ server and enable it
- D. Configure transport input ssh command on the console
- E. Configure a domain name
Answer: A,E
Explanation:
Explanation
Follow these guidelines when configuring the switch as an SSH server or SSH client:
+ An RSA key pair generated by a SSHv1 server can be used by an SSHv2 server, and the reverse.+ If the SSH server is running on a stack master and the stack master fails, the new stack master uses the RSA key pair generated by the previous stack master
+ If you get CLI error messages after entering the crypto key generate rsa global configuration command, an RSA key pair has not been generated. Reconfigure thehostname and domain, and then enter the crypto key generate rsa command.+ When generating the RSA key pair, the message No host name specified might appear. If it does, you must configure a hostname by using the hostname globalconfiguration command.+ When generating the RSA key pair, the message No domain specified might appear. If it does, you must configure an IP domain name by using the ip domain-nameglobal configuration command.+ When configuring the local authentication and authorization authentication method, make sure that AAA is disabled on the console.
NEW QUESTION # 352
Which two components are needed for a service provider to utilize the LVPN MPLS application? (Choose two.)
- A. The P and PE routers must be configured with LDP or RSVP
- B. The PE routers must be configured for MP-eBGP to connect to CEs
- C. The P routers must be configured with RSVP.
- D. The PE routers must be configured for MP-iBGP with other PE routers
- E. The P routers must be configured for MP-iBGP toward the PE routers
Answer: A,D
Explanation:
Explanation
MPLS Network Protocols
+ IGP: OSPF, EIGRP, IS-IS on core facing and core links+ RSVP and/or LDP on core and/or core facing links
->
+ MP-iBGP on PE devices (for MPLS services), MP-BGP: Multiprotocol Border Gateway Protocol, used for MPLS L3 VPN -> .
NEW QUESTION # 353 
Refer to the exhibit. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 354
......
Try 100% Updated 300-410 Exam Questions [2024]: https://www.dumptorrent.com/300-410-braindumps-torrent.html
The Best CCNP Enterprise 300-410 Professional Exam Questions: https://drive.google.com/open?id=1aTjnYiXjl9yY48251o1AWWPxa4BrlyUS