Try 100% Updated 300-410 Exam Questions [2022]

Pass 300-410 Exam - Real Questions & Answers

VPN Technologies

This part makes up 20% of the exam questions and evaluates the students’ skills in the following:

• ExplainingMPLS Layer-3 VPN;
• Verifying and configuring DMVPN (the single hub). It also covers your understanding of HNRP, GRE/mGRE, IPsec, Spoke-to-Spoke, and Dynamic neighbor.
• Explaining the MPLS operations, including label switching, LDP, LSP, and LSR;

Who Is the Target Audience of Cisco ENARSI 300-410?

Anyone interested in climbing the ladder quickly in their networking career should complete this exam as part of the requirements to get the CCNP Enterprise certification. Generally, there are no strict requirements set for 300-410 applicants. However, there is a recommendation that individuals should have at least three years of experience related to the implementation of enterprise networking solutions. Also, sound knowledge in computer networking fundamentals is suggested.

What Is the Cisco ENARSI 300-410 Exam?

As was said above, Cisco ENARSI 300-410 is one of the six concentration exams associated with CCNP Enterprise. This test assesses the applicant's knowledge of handling VPN services, Layer 3 technologies, security in infrastructure, and troubleshooting skills.

The duration one gets to complete the exam is currently set at 90 minutes. The test is offered in English as well as Japanese languages. Candidates can expect a mix of multiple-choice, multiple answers, and drag and drop questions. A fee of $300 is charged from each exam-taker for every attempt, and the registration is held through Pearson VUE.

 

NEW QUESTION 56
Refer to the exhibit.

In which circumstance does the BGP neighbor remain in the idle condition?

• A. if a prefix list is applied on the inbound direction
• B. if prefixes reach the maximum limit
• C. if prefixes are not received from the BGP peer
• D. if prefixes exceed the maximum limit

Answer: D

 

NEW QUESTION 57
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template".
What is the reason for the error?

• A. The software version of the template is different from the software version of the device.
• B. The tag that was used to filter the templates does not match the device tag.
• C. The changes to the template were not committed.
• D. The template has an incorrect configuration.

Answer: B

Explanation:
Section: Infrastructure Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and- management/dna-center/1-2-10/user_guide/b_cisco_dna_center_ug_1_2_10/ b_dnac_ug_1_2_10_chapter_0111.html

 

NEW QUESTION 58
Refer to the exhibit.

A user cannot SSH to the router. What action must be taken to resolve this issue?

• A. Configure transport input ssh
• B. Configure transport output ssh
• C. Configure ip ssh version 2
• D. Configure ip ssh source-interface loopback0

Answer: A

Explanation:
Explanation
https://www.cisco.
com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_15

 

NEW QUESTION 59
Refer to the exhibit.

All the serial between R1, R2, and R3 have the Same bandwidth. User on the 192.168.1.0/24 network report slow response times while they access resource on network 192.168.3.0/24. When a traceroute is run on the path. It shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 is still up. What must the network administrator to fix the slowness?

• A. Redistribute theR1 route to EIGRP
• B. Add a static route on R1 using the next hop of R3.
• C. Change the Administrative Distance of EIGRP to 5.
• D. Remove the static route on R1.

Answer: D

 

NEW QUESTION 60
Refer the exhibit.

Which action resolves intermittent connectivity observed with the SNMP trap packets?

• A. Decrease the committed burst Size of the mgmt class map
• B. Increase the CIR of the mgmt class map
• C. Add a new class map to match TCP traffic
• D. Add one new entry in the ACL 120 to permit the UDP port 161

Answer: D

 

NEW QUESTION 61
Refer to the exhibit.

An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?

• A. Start IP SLA by matching numbers for track and ip sla commands
• B. Use the same AD for both default routes
• C. Start IP SLA by defining frequency and scheduling it
• D. Use the icmp-echo command to track both default routes

Answer: A

 

NEW QUESTION 62
Drag and drop the DHCP messages from the left onto the correct uses on the right.

Answer:

Explanation:

Reference:
DHCPINFORM: If a client has obtained a network address through some other means or has a manually configured IP address, a client workstation may use a DHCPINFORM request message to obtain other local configuration parameters, such as the domain name and Domain Name Servers (DNSs). DHCP servers receiving a DHCPINFORM message construct a DHCPACK message with any local configuration parameters appropriate for the client without allocating a new IP address. This DHCPACK will be sent unicast to the client.
DHCPNAK: If the selected server is unable to satisfy the DHCPREQUEST message, the DHCP server will respond with a DHCPNAK message. When the client receives a DHCPNAK message, or does not receive a response to a DHCPREQUEST message, the client restarts the configuration process by going into the Requesting state. The client will retransmit the DHCPREQUEST at least four times within 60 seconds before restarting the Initializing state.
DHCPACK: After the DHCP server receives the DHCPREQUEST, it acknowledges the request with a DHCPACK message, thus completing the initialization process.
DHCPDECLINE: The client receives the DHCPACK and will optionally perform a final check on the parameters. The client performs this procedure by sending Address Resolution Protocol (ARP) requests for the IP address provided in the DHCPACK. If the client detects that the address is already in use by receiving a reply to the ARP request, the client will send a DHCPDECLINE message to the server and restart the configuration process by going into the Requesting state.
https://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation-resolution/27470-100.html

 

NEW QUESTION 63
An engineer configured a DHCP server for Cisco IP phones to download its configuration from a TFTP server, but the IP phones failed to toad the configuration What must be configured to resolve the issue?

• A. BOOTP port 68
• B. DHCP option 69
• C. BOOTP port 67
• D. DHCP option 66

Answer: D

Explanation:

 

NEW QUESTION 64
Drag and drop the operations from the left onto the locations where the operations are performed on the right.

Answer:

Explanation:

Explanation
Label Switch Router 1. Reads labels and forwards the packet based on the based on the label.
2. Performs PHP
Label Edge Router: 1 Assigns labels and unlabeled packets.
2. Handles traffic between multiple VPNs

 

NEW QUESTION 65
Refer to the exhibit.

The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
A)

B)

C)

D)

• A. Option B
• B. Option D
• C. Option C
• D. Option A

Answer: A

 

NEW QUESTION 66
Refer to the exhibit.

What is the result if applying this configuration?

• A. The router cannot form BGP neighborships with any other device
• B. The router can form BGP neighborships with any other device.
• C. The router cannot form BGP neighborships with any device that is matched by the access list named ''BGP''
• D. The router can form BGP neighborships with any device that matched by the access list named ''BGP''

Answer: B

 

NEW QUESTION 67
Refer to the exhibit.

R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to
172.16.25.0/24 from R1, but it does not advertise to R3. What is the reason the route is not advertised?

• A. In route reflector setups, prefixes are not advertised from one client to another.
• B. R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.
• C. In route reflector setup, only classful prefixes are advertised to other clients.
• D. Route reflector setup requires full IBGP mesh between the routers.

Answer: B

 

NEW QUESTION 68
Refer to the exhibit.

Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

• A. Issue the no eigrp stub command on R1.
• B. Issue the eigrp stub command on R2.
• C. Issue the eigrp stub command on R1.
• D. Issue the no eigrp stub command on R2.

Answer: A

 

NEW QUESTION 69
Refer to the exhibit.

To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a ........... path through R5 to reach 10.1.1.0/24 network. Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?

• A. Apply the outbound distribution list on R5 toward R4 in OSPF.
• B. Change the administrative distance of the external EIGRP to 90.
• C. Change the administrative distance of OSPF to 200 on R5.

Answer: B

 

NEW QUESTION 70
Refer to the exhibit.

After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?

• A. Redistribute the directly connected interfaces on R2.
• B. Set the administrative distance 100 under the RIP process on R2.
• C. Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.
• D. Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.

Answer: C

 

NEW QUESTION 71
Refer to the exhibit. The network administrator configured the branch router for IPv6 on the E 0/0 interface The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?

• A. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E 0/0 interface.
• B. Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command
• C. Enable the IPv4 address family under the E 0/0 interface by using the address-family Ipv4 unicast command
• D. Disable IPv6 on the E 0/0 interface using the no ipv6 enable command

Answer: B

 

NEW QUESTION 72
Refer to the exhibit.

Which statement about R1 is true?

• A. RIP learned routes are distributed to OSPF with a tag value of one.
• B. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.
• C. RIP routes are redistributed to OSPF without any changes.
• D. OSPF redistributes RIP routes only if they have a tag of one.

Answer: A

 

NEW QUESTION 73
......

300-410 Exam Questions Get Updated [2022] with Correct Answers: https://www.dumptorrent.com/300-410-braindumps-torrent.html

Free Cisco 300-410 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=1ybFNYssZzQckJ_p_UA_m0pa2W2DX13fD